Overview
The Bilstein 24-188227 is a front 46mm monotube heavy duty shock absorber for the 2007–2013 Chevrolet Silverado 1500 and the 2007–2013 GMC Sierra 1500. It is not for electronic suspension, so check your truck’s suspension type before ordering.
Bilstein describes its 4600 Series B6 heavy duty design for full-size sedans, SUVs and trucks, with a monotube gas-pressure body and a piston head that allows independent damping tuning. Those general claims come from the manufacturer, while the fitment section below gives the specific vehicle guidance.
Key features
- Heavy duty monotube gas-pressure construction
- Piston head with independent compression and rebound damping
- Yellow paint over a steel body
- Not for electronic suspension vehicles
Heavy duty shocks on half-ton trucks
Half-ton pickups carry heavy loads in the bed and tow trailers, so the front shocks handle more sustained heat and load cycles than a typical car. A heavy duty monotube body separates the oil from the gas charge, which lets damping stay consistent as the shock warms during long grades or repeated bumps on rough roads.
Front shocks wear faster when the rest of the front end is worn. Check the upper mount, lower bolt and the control arm bushings before fitting a new unit, since loose hardware changes the angle of the shock. Replacing front shocks in pairs keeps steering and braking balanced across the axle.
- Check the electronic suspension status before ordering
- Inspect the front end bushings during replacement
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-188227 |
| UPC | 651860629643 |
| Shock series | 4600 Series |
| Position | Front |
| Type | 46mm monotube, gas charged |
| Body | Steel |
| Finish | Yellow |
| Lift/drop | 0 in. |
| Electronic suspension | Not for electronic suspension |
| Fitment label | Direct Fit |
| Previous part number | BILF4-BE5-D971-H1 |
Vehicle fitment
The 2007–2013 Chevrolet Silverado 1500 (Hybrid, LS, LT, LTZ, WT and XFE trims) and the 2007–2013 GMC Sierra 1500 (Hybrid, SL, SLE, SLT, WT and XFE trims) are covered.
Heavier-duty Silverado and Sierra models are not in the list, and vehicles with electronic suspension are excluded. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because this shock is not for electronic suspension, confirm your truck’s suspension type before ordering or fitting it. Match the front position and gas-charged design to the existing unit before swapping.
What’s included
One front shock absorber. Confirm the mounting hardware you need before installing.









