Overview
The Bilstein 46mm Monotube Shock Absorber, part number 24-186780, is a B6 Heavy Duty monotube shock with a 46mm body. Its design is hydraulic and gas charged, and it is set up for the Spartan Rear application.
The shock is labeled universal fit, but a shock still has to match the mounting points and length of the vehicle it goes on. No vehicles are named for this part number, so confirm the dimensions against the shock you are replacing.
Key features
- 46mm monotube body
- B6 Heavy Duty line
- Hydraulic, gas charged design
- Part number 24-186780
Monotube design basics
A monotube shock uses a single pressure tube, with the piston moving inside it and the gas separated from the oil. That layout tends to resist foaming during repeated hard use, which is why it is often used in heavy-duty work. Because the body is sealed, service usually means inspection and replacement rather than rebuilding.
Measure length and stroke before installing, and compare the mounting eyes and studs with the shock being removed. Check any bushings and hardware included with the unit, and replace worn parts at the same time to keep the axle balanced. Look for leaks at the seals and dents in the body, which can make the damper bind.
- Compare mounting eye sizes
- Check for seal leaks
- Replace worn bushings with the shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186780 |
| UPC | 651860577548 |
| Body size | 46mm |
| Series | B6 Heavy Duty |
| Design | Monotube, hydraulic / gas charged |
| Listed application | Spartan Rear |
Vehicle fitment
Mounting points and length decide fit for any shock, so compare dimensions with the shock being replaced before installing.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Check whether mounting hardware or bushings are needed for your installation before starting.









