Overview
Bilstein part number 33-186542 is a rear 5100 Series shock absorber with 16 mm eye mounts at both ends, rated for a 2 – 4 in. lift. It is a gas-charged, non-coilover monotube unit.
The 5100 Series is a single-tube gas-pressure line for lifted trucks, Jeeps and prerunners. Confirm the series marking on your part before installing, since the series appears in more than one form.
Key features
- Monotube gas pressure construction
- Self-adjusting deflecting disc valving
- High-flow piston for less harshness
- Independent rebound and compression tuning
- Larger working piston area for exact damping
- Designed for lift kits using the stock OEM mounting configuration
Choosing a lift height
Shock absorbers control how quickly the suspension compresses and rebounds, so their job changes once a lift raises the truck. A lifted suspension often gives the shock longer travel and different mounting angles than stock, and the shock has to control that movement without bottoming out or running out of extension. Before buying a shock for a lift, compare its collapsed and extended lengths with the unit you are removing.
Gas-charged monotube designs keep damping fluid under pressure, which helps resist foaming on long descents. Pair the shock with bushings and bolts that match the eye size, and inspect them at installation. Worn bushings can make a new shock feel loose, so check them at the same time.
- Measure the mount spacing before ordering
- Inspect bushings and bolts after the first drive
- Look for oil residue on the shaft or body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-186542 |
| UPC | 651860626659 |
| Series | 5100 Series |
| Position | Rear |
| Collapsed length | 15.12 in. |
| Extended length | 24.31 in. |
| Travel length | 9.19 in. |
| Lower mount | Eye, 16 mm |
| Upper mount | Eye, 16 mm |
| Shaft diameter | 14 mm |
| Body design | 46 mm ID smooth body (non-coilover) |
| Reservoir | No |
| Gas charged | Yes |
| Finish | Zinc plated |
| Fitment type | Direct fit |
| Lift height | With 2 – 4 in. lift |
Vehicle fitment
It is a direct fit unit. No vehicle, model or year is named for this part number, so match your year, model and trim to your truck before buying.
Measure your current shock’s collapsed and extended lengths before deciding, and compare them with this unit’s 15.12 in. collapsed and 24.31 in. extended measurements.
Installation notes
Both eye mounts are 16 mm, so compare them with your existing hardware first. With a 2 – 4 in. lift rating, measure your suspension height before fitting the shock.
What’s included
One shock absorber. Boot inclusion and mounting hardware are not confirmed for this part number, so check the package contents against your installation before starting.









