Overview
The Bilstein 24-185257 is a 5100 Series shock absorber with a 46mm ID smooth body, a monotube internal design and a zinc plated finish. Its intended uses are lifted trucks, Jeeps and prerunners. Confirm fit for your vehicle’s year, model and trim before ordering.
The 5100 Series uses a single-tube gas pressure design intended for large-diameter tire setups, with independent rebound and compression tuning. A high-flow piston is intended to reduce harshness, and a self-adjusting deflecting disc valve controls damping.
These shocks are designed for lift kits that keep the stock O.E.M. mounting configuration. Compare the mounts on your truck with the bar pin lower and stem upper before fitting.
Key features
- Self-adjusting deflecting disc valving
- High-flow piston intended to reduce harshness
- Larger working piston area for damping control
- Independent rebound and compression tuning
- Designed for specific lift kits that keep stock O.E.M. mounting
- Boot included
Matching shock length to a lift
A longer lift changes the distance a shock must cover, so the collapsed and extended lengths matter more than the part name alone. Measure the shock you are removing with the suspension at rest, then compare both lengths before buying a replacement. Large-diameter tires add weight and rotating load, which raises the work the damper does on every bump. A shock sized for that load helps keep the wheels in contact with the ground.
Lift kits often come with their own brackets, bump stops and sometimes sway bar links. Those parts should be checked together with the shock, because a stop that contacts the body early can limit travel. Gas-charged units hold pressurized gas and should not be heated, cut or opened. Replace the boot if it has torn, since grit on the shaft wears the seals faster.
- Measure the old shock at its installed height
- Check bump stops for clearance at full compression
- Inspect the boot and shaft for scoring
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-185257 |
| UPC | 70000403341 |
| Shock series | 5100 Series |
| Collapsed length | 14.88 in. |
| Extended length | 24 in. |
| Travel length | 9.12 in. |
| Lower mount | Bar pin |
| Upper mount | Stem |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body (non-coilover) |
| Internal design | Monotube |
| Charge | Gas charged |
| Reservoir | No |
| Finish | Zinc plated |
| Lift height | w/3 in. lift |
| Boot included | Yes |
Vehicle fitment
The shock is intended for lifted trucks, Jeeps and prerunners. Confirm the year, make, model and trim against your vehicle before buying.
Compare the 14.88 in. collapsed length and 24 in. extended length with your current shock before ordering.
Installation notes
The shock is designed around the stock O.E.M. mounting configuration, so confirm that your lift kit or truck matches the lower bar pin and upper stem before fitting.
What’s included
One shock absorber with a boot.
Not included: No brackets, lift components or other parts come with the shock. Check the package contents against your installation before starting.












