Overview
This is a rear monotube shock for the 2016–2018 Toyota Tacoma, part of the 4600 Series and also known as a B6 4600 rear shock. It has a 0 in. lift/drop setting.
Monotube gas pressure construction is designed to support ride and handling, traction and stability. The shock is tuned for the vehicle it fits, and no towing rating or load figure is given for this part.
Key features
- Monotube gas pressure construction
- Vehicle specific ride tuning
- Rear position, direct fit
- Tuned for the Tacoma trims it fits.
- Lift/drop setting of w/0 in.
Towing and rear shock load
A rear shock works with the leaf or coil springs to control body movement under load, so the rear end can feel different when the bed is loaded or a trailer is hitched. Fade and overheating become more of a concern on long grades, which is why gas pressure construction is used on many trucks and SUVs. Lighter loads can make a worn shock feel acceptable, so testing the ride after any change in load is a good habit.
Towing puts higher forces through the rear mounts and bushings, so inspect them more often if you tow regularly. Replace rear shocks in pairs, and keep tire pressure and payload within the vehicle’s limits.
- Inspect rear mounts and bushings more often when towing
- Check the shock body for oil seepage
- Recheck rear bolts after the first tow
- Replace worn bump stops with the shock
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-265973 |
| UPC | 651860791425 |
| Product line | 4600 Series, also known as B6 4600 |
| Position | Rear |
| Fitment type | Direct Fit |
| Lift/drop | w/0 in. Lift/Drop |
| Construction | Gas charged, monotube |
Vehicle fitment
It fits the 2016–2018 Toyota Tacoma in Limited, SR, SR5, TRD Off-Road, TRD Pro and TRD Sport trims.
Tacoma model years outside 2016–2018 and trims not named are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One rear shock absorber. Check the package contents against your installation before starting.












