Select your vehicle
-13%

Bilstein 4600 Series Shock Absorber – 24-186100

Bilstein

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front monotube gas charged shock with a 2 inch body
  • Made for 2003–2005 Chevrolet Silverado 1500 SS
  • Dividing piston helps prevent oil aeration as heat builds
  • Boots included, yellow finish, part number 24-186100

Description

Overview

The Bilstein 4600 Series shock absorber, part number 24-186100, is a front monotube gas charged shock with a 2 inch body and a yellow finish. It is a direct fit for the 2003–2005 Chevrolet Silverado 1500 SS.

Bilstein describes its monotube gas pressure design as technically superior. The tube is seamless and made by a special extrusion method, which the company says gives a tight peak-to-valley tolerance and a consistent wall thickness.

A dividing piston lets the oil expand as heat builds, which Bilstein says prevents foaming and keeps the shock’s damping steady as temperatures rise. The piston head is designed so compression and rebound damping can be tuned separately.

In a monotube shock the damping oil and the gas charge sit in one tube, separated by a floating piston. The body carries heat away from the oil, which helps the design resist foaming when the shock runs hot.

The piston head is designed so compression and rebound damping can be tuned separately, which supports ride comfort and performance. The design uses fewer parts and a simple digressive layout, which supports durability and long life.

Key features

  • Seamless monotube body with gas charge
  • Dividing piston that prevents oil aeration and viscosity loss as heat builds
  • Compression and rebound damping tuned independently
  • Fewer parts than many twin tube designs
  • Boots included

Monotube shocks and heat

Shock absorbers turn motion into heat as they control the spring and the wheel. On a truck used for towing, long grades or off-road runs, that heat builds up quickly, and a shock that holds its damping under heat keeps the ride predictable. A monotube design, with its single tube and gas charge, is built to carry heat away from the oil and keep the damping steady.

Front shocks affect steering stability, braking feel and how the truck settles after bumps. Replace them as a pair on the same axle so both sides react the same way. Check the mounts, bushings and hardware at the same time, since worn parts can change how the new shock performs.

  • Replace front shocks in pairs for even damping
  • Inspect mounts and bushings during installation
  • Check for leaks on the shock body

Specifications

Brand Bilstein
Part number 24-186100
Series 4600
Location Front
Shock type Monotube, gas charged
Body diameter 2 inches
Finish Yellow
Reservoir No
Boots included Yes

Vehicle fitment

This shock is made for the 2003–2005 Chevrolet Silverado 1500 SS.

Other Silverado generations and the 2500 and 3500 trucks are not on the list. This is a front shock, so check the position against your suspension. Confirm your vehicle’s year, model and trim before ordering.

What’s included

The shock comes with its boot. Mounting hardware is not included with this shock; check what your installation needs.

Fitment

VehicleYearsTrims
Chevrolet Silverado 15002003–2005SS

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Bilstein 24-186100 fit a 2004 Silverado 1500?

Yes, if the truck is an SS. The list gives the 2003–2005 Chevrolet Silverado 1500 SS, so a 2004 SS is covered. Other Silverado generations and the 2500 and 3500 trucks are not on the list, so confirm your year, model and trim before ordering.

Is the 4600 Series shock a monotube?

Yes. It is a monotube gas charged design with a 2 inch body, and it includes boots. The design moves heat from the oil out through the shock body, so the shock keeps its damping as temperatures rise.

Does it have a remote reservoir?

No. This shock has no remote reservoir. It is a front unit with a 2 inch body diameter and a yellow finish, made for the 2003 through 2005 Silverado 1500 SS.

How do I tell if a front shock needs replacing?

Look for fluid leaks on the body, a bouncy ride after bumps, uneven tire wear and a shock that rebounds too fast. Replacing worn shocks in pairs keeps the front end balanced.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon