Overview
The Bilstein BIL33-187563 is a front B6 Series gas-charged monotube shock absorber for Ford E-Series vans. It fits the Ford E-150 Base, XL and XLT from 2008 to 2014, the E-250 from 1992 to 2014, the E-350 Econoline and Club Wagon from 1992 to 2005, and E-350 Super Duty models from 1999 to 2002, 2004 to 2019 and 2021.
The shock is tuned for each application and built with gas pressure technology. It is also suited to vans and short wheelbase Class C motorhomes. E-450 Super Duty vans need extra checking before ordering.
A monotube shock keeps its working fluid and gas charge in one cylinder. The front position matters on these vans because the front shock controls movement of the front axle, so front and rear shocks are not interchangeable. This shock is for the front position only. Check the position marking against the original part before fitting.
Key features
- Gas-charged monotube design
- Front location with an eyelet bottom mount
- Zinc-plated body
- OEM body diameter
- The gas pressure design adds reserve for towing and loaded use.
- The design is intended to improve grip and lane stability, and the original spring can stay in place.
Front shock fitting tips
Front shocks do a different job from rear shocks. They help control dive under braking and steering inputs, and they work with the front springs and steering geometry. On a van used for work or towing, worn front dampers can make the front end feel loose and can cause uneven tire wear.
Before buying, confirm the position and mount style against the shock you are removing. If you have the old shock on hand, measure its compressed and extended length and compare the eyelet bottom mount. Replace front shocks in pairs so both sides damp the same way.
- Check front springs and mounts for wear
- Look for oil on the shock body
- Tighten fasteners to the specification in your service manual
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL33-187563 |
| Series | B6 Series |
| Shock type | Monotube |
| Charge | Gas charged |
| Body diameter | OEM |
| Body finish | Zinc-plated body |
| Location | Front |
| Bottom mount | Eyelet |
| Fitment type | Direct fit |
| Quantity | Sold individually |
Vehicle fitment
It fits the 2008–2014 Ford E-150 (Base, XL and XLT), the 1992–2014 Ford E-250 (Base, Econoline Base and Econoline XL), the 1992–2005 Ford E-350 Econoline and Club Wagon, and the 1999–2002, 2004–2019 and 2021 Ford E-350 Super Duty.
Confirm your vehicle’s year, model and trim before ordering, especially for E-450 Super Duty vans.
Installation notes
Compare the eyelet bottom mount and the overall length with the original front shock before fitting. Work on a securely supported vehicle.
What’s included
One front shock absorber, sold individually.









