Overview
The Bilstein 4600 Series Shock Absorber, part number 24-184991, is a front shock with a 2 in. monotube gas-charged body and a yellow finish. It is built as a direct-fit replacement for the front position, and boots come with it. No vehicle fitment is named for this part, so confirm the fit before choosing it.
This monotube gas-charged design draws heat from the oil through the outer shock body. A dividing piston lets the oil expand as it warms, which limits foaming and thinning so damping holds up as temperatures climb. The tube is made by a special extrusion method that keeps wall thickness consistent and peak-to-valley tolerance tight.
The piston head is tuned separately for compression and rebound damping. The design uses fewer parts than a conventional twin tube, and its digressive valving is built to support long service life.
Key features
- Monotube gas-charged body with a 2 in. diameter
- Dividing piston allows the oil to expand as heat builds
- Compression and rebound damping tuned separately at the piston head
- Extruded tube with tight peak-to-valley tolerance
- Fewer parts than conventional twin tube designs
- Boots included with the yellow-finish shock
Front shock selection
A front shock controls the front axle through bumps, braking and steering, so worn units can cause a floating or bouncy feel at the steering wheel. Gas-charged monotube bodies resist foaming and keep damping steady as they warm up, which helps on longer drives. Because the body is pressurized, it should be inspected for leaks and kept away from heat.
Before buying, compare the mounting points, eye or stud sizes and overall length with the shock you are replacing. Fit is the main deciding factor, so confirm the year, model and trim first. Replace front shocks in matched sets to keep steering balanced.
- Compare mount types before ordering
- Inspect boots and bump stops for damage
- Watch for uneven front tire wear
- Replace worn steering or ball joint parts when found
Specifications
| Brand | Bilstein |
|---|---|
| Shock series | 4600 Series |
| Part number | 24-184991 |
| UPC | 651860426969 |
| Position | Front |
| Body diameter | 2 in. |
| Type | Monotube |
| Charge | Gas charged |
| Reservoir | No |
| Boots included | Yes |
| Finish | Yellow |
| Lift height | 0 in. lift/drop |
| Fitment type | Direct Fit |
Vehicle fitment
No make, model or year range is confirmed for this part. Confirm fit for your vehicle’s year, model and trim before ordering, and match the front position to the shock you are replacing.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The specifications describe this as Direct Fit, so it is intended to replace an original front shock without a lift. Gas-charged bodies are under pressure, so keep heat and cutting tools away from the tube.
What’s included
Boots are included with the shock. The specifications list Reservoir as No, so this is a single-tube shock without a remote reservoir.
Not included: Check whether your installation requires mounting hardware before starting.









