Overview
The Bilstein 4600 Series front shock, part number BIL24-185448, is a gas charged monotube shock with a 2 inch body diameter, boots included and a yellow finish. It is a direct fit for the 2000 to 2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trim.
The shock has no external reservoir, and its design carries heat out of the oil through the outer surface of the body. That helps the shock release heat efficiently, which supports durability on a large, heavy SUV.
A dividing piston allows the oil to expand as it warms, so the oil does not foam or thin out. This keeps the full damping available as temperatures rise, and the piston head can be tuned for compression and rebound separately.
The seamless tube is made by a special extrusion method for a tight tolerance and consistent wall thickness. Bilstein describes its strength and heat dissipation as the reasons the shock lasts.
The 2 inch body diameter and yellow finish are the physical details of this shock.
Key features
- Front position
- Gas charged monotube design
- 2 inch body diameter
- Boots included
- No external reservoir
- Yellow finish
- Dividing piston for steady oil volume
- Separate compression and rebound tuning
Front shocks on large SUVs
A large SUV puts considerable weight on the front axle, so the front shocks control body motion during braking, cornering and off-pavement travel. When damping fades, the vehicle can dive, wander or rock after rough sections. Front shocks often wear in a similar way on both sides, which is one reason they are commonly replaced together.
During inspection, look at the upper and lower mounts, the steering components and the front springs. A shock that leaks around the rod or makes a knocking sound over bumps should be replaced. Keeping the boots intact helps stop grit from entering the seal and shortening its life.
- Check ball joints and tie rod ends
- Inspect front springs for sag
- Look for fluid on the shock body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | BIL24-185448 |
| Shock series | 4600 Series |
| Position | Front |
| Shock type | Monotube, gas charged |
| Body diameter | 2 inch |
| Reservoir | None |
| Boots | Included |
| Finish | Yellow |
| Fitment | Direct fit |
Vehicle fitment
It fits 2000–2005 Ford Excursion models in Eddie Bauer, Limited, XLS and XLT trim.
The list does not include the Excursion from other years, the Ford F-150 or Expedition, or any Super Duty model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the length and mounts against the front springs and steering components before installing. On a large SUV the front shocks are often replaced as a pair.
What’s included
The product is one front monotube shock with boots, under part number BIL24-185448.









