Overview
The Bilstein 7100 Series AK7114R01 is a reservoir shock absorber from the 7100 line, which Bilstein designed for stock trucks, prerunners, limited race buggies, sand buggies and recreational off-road vehicles. The reservoir version pairs the shock with a remote reservoir, and the series can also be bought without one.
The shock body is 2 inches in diameter and uses a monotube gas pressure design. A high-flow piston reduces harshness, and the valving is self-adjusting, with a deflecting disc. Bilstein offers a choice of valvings in this series, so the damping can be matched to the job. The dividing piston sits in the reservoir, and the valve is a Schrader fitting.
Confirm fit for your vehicle’s year, model and trim before ordering. The 7100 Series comes in 8, 10, 12 and 14 inch travel, so measure your current shock to choose the right length.
Key features
- Reservoir version of the 7100 Series
- Gas pressure monotube construction
- 2 in diameter shock body
- High-flow piston that reduces harshness
- Choice of valvings in the series
Ride quality off road
Monotube shocks use a single tube with a floating piston, so the gas charge keeps the oil under pressure and reduces foaming during hard use. Combined with a high-flow piston, that design suits trucks that spend time on washboard roads and rocky climbs where heat and fade become a concern.
When choosing a shock from a multi-valving series, think about the weight of the truck, the tires fitted and how the vehicle is used most. A softer setting helps comfort on pavement, while firmer valving keeps the body steadier at speed on rough terrain. Keep the mounting hardware and bushings in good shape, because a slipping eyelet changes how the damper works.
- Note the valving setting before you install
- Check the mounts after the first few drives
- Look for oil on the shaft after rough trips
Specifications
| Brand | Bilstein |
|---|---|
| Part number | AK7114R01 |
| Shock series | 7100 Series |
| Shock type | Reservoir, monotube gas pressure |
| Body diameter | 2 in |
| Valve | Schrader |
| Travel options in series | 8, 10, 12 and 14 in |
| Fitment type | Universal |
Vehicle fitment
Shocks must match a specific vehicle’s length and mounting, so confirm both against your truck before ordering.
Confirm the travel and installed length against the truck you are building. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One reservoir shock absorber.









