Overview
The Bilstein 24-238533 is a rear 46mm monotube shock absorber from the 4600 Series, a gas-charged damper with a Direct Fit label and a lift/drop rating of 0 in. Bilstein positions the 4600 Series for trucks, vans and SUVs.
The damper design is meant to let a vehicle travel smoothly over many road surfaces while keeping it under control. Confirm the rear application for your year, model and trim, since no vehicle is attached to this part number.
Key features
- 46mm monotube body with gas-charged damping
- Designed for the rear position
- Part of the Bilstein 4600 Series
- Patented damper design.
- Lift/drop rating of 0 in.
Rear shock inspection basics
Rear shocks control body motion over bumps and under load, and they work with leaf springs or coil springs depending on the truck or SUV. A rear damper that has worn out often lets the rear end bounce, sway on corners or squat when the vehicle is loaded. Checking the rear mounts and eyes helps confirm whether the shock is the cause.
When buying a rear shock for a lifted or loaded vehicle, match the mounting style and overall length first, since the spring setup changes how much travel is available. Rear shocks are often replaced in pairs, and worn rear bushings and bump stops are usually inspected at the same time.
- Inspect rear eyes and bushings for play
- Look for oil on the shock body
- Check bump stops for cracking
- Recheck rear mount bolts after a short drive
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-238533 |
| UPC | 651860741840 |
| Shock size | 46mm Monotube |
| Product line | 4600 Series |
| Position | Rear |
| Hydraulic / gas charged | Gas Charged |
| Lift/Drop | 0 in. |
| Fitment label | Direct Fit |
Vehicle fitment
No vehicle is named for this rear shock, so fit cannot be confirmed from the part number alone. Look up the rear application for your truck, van or SUV and match the year, model and trim before choosing this shock.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the rear mounting eyes and overall length to your original shock before installing, since rear shocks are chosen by position as well as by vehicle.
What’s included
The package holds one rear shock absorber. Check the package contents against your installation before starting.









