Overview
The Bilstein 4600 Series front shock absorber, part number 24-011396, is a gas charged monotube damper. It is a direct-fit replacement with a lift/drop of 0 in, so it does not change ride height. It fits 1986–1989 Toyota 4Runner (DLX, SR5) and 1986–1995 Toyota Pickup (Base, Base Turbo, DLX, SR5, SR5 Turbo) models.
Monotube construction keeps the gas charge and damping oil in one tube. A dividing piston lets the oil expand as it heats, which Bilstein says limits foaming and viscosity loss so damping holds up as temperatures climb. The seamless tube is extruded for a tight peak-to-valley tolerance and even wall thickness, and the piston valving can be tuned separately for compression and rebound. Boots are included, and there is no external reservoir.
Key features
- Gas charged monotube body with a dividing piston to manage oil expansion as temperatures rise
- Seamless extruded tube held to a tight peak-to-valley tolerance with consistent wall thickness
- Piston head tuned independently for compression and rebound damping
- It has fewer parts than most conventional twin tube designs.
- Boots included
- Yellow finish with a 2 in body diameter
Lift-free replacement and upkeep
A direct-fit front shock with no lift keeps the existing ride height, so the vehicle should feel the same as it did before the old unit wore out. Monotube designs keep the gas and oil in one tube, which means fewer external parts to leak. Check the body for an oil film, the shaft for scoring and the boot for splits, since any of those can reduce damping at the front wheels.
When removing a front shock, support the vehicle on stands and allow the suspension to extend fully so the spring is controlled. Clean the mounting bolts and inspect the bushings while the shock is out. Older trucks often have rust around the mount, so a quick check helps avoid problems later.
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-011396 |
| UPC | 651860629285 |
| Shock series | 4600 Series |
| Position | Front |
| Type | Monotube |
| Charge | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
| Lift/drop | 0 in |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1986–1989 Toyota 4Runner in DLX and SR5 trims and the 1986–1995 Toyota Pickup in Base, Base Turbo, DLX, SR5 and SR5 Turbo trims.
Other 4Runner years, including 1990 and later, and Pickup years outside 1986 to 1995 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the lift/drop is 0 in, this is a like-for-like front damper that will not change ride height. Support the vehicle on stands rated for its weight before working underneath it.
What’s included
The shock absorber with boots is included. Check your installation for mounting hardware needs before starting.









