Overview
The Bilstein 5100 Series rear shock absorber, part number 24-186773, is a gas charged monotube shock for lifted trucks, Jeeps and prerunners. It fits the 2004–2015 Nissan Titan in LE, S, SE, SL, SV and XE trims.
This shock has a 46mm ID smooth body in a non-coilover design, a single tube and no external reservoir. Bilstein built the 5100 Series for owners who run large-diameter tires and want steady, fade-free damping over long use. Both ends use 14mm eye mounts, and the boot is included.
Key features
- Monotube gas pressure construction for consistent damping
- Self-adjusting deflecting disc valving
- High-flow piston that Bilstein says reduces harshness
- Independent rebound and compression tuning
- Larger working piston area for precise damping control
- Designed for lift kits that keep the stock OEM mounting configuration
- Boot included
Care and maintenance
Shocks on a full-size pickup work hardest when the rear axle moves over broken pavement or when the bed is loaded. A gas charged monotube body keeps damping oil under pressure, which helps the control stay steady after repeated hits. Keeping the rear springs, bump stops and bushings in sound condition lets the shock do its job without carrying extra load.
Routine care is simple. Wipe the shaft after dusty drives so grit does not work into the seal, and look at the boot for tears that let moisture in. Loose or worn mounting hardware can make a new shock knock, so recheck the bolts after the first few trips. Rear shocks often wear in pairs, and replacing both keeps the truck level.
- Wipe the shaft after dusty or muddy drives
- Check the boot for tears or cracks
- Recheck mounting bolts after the first few trips
- Inspect eye bushings for wear
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 24-186773 |
| UPC | 651860568928 |
| Shock series | 5100 Series |
| Position | Rear |
| Collapsed length | 14.96 in |
| Extended length | 23.76 in |
| Travel length | 8.8 in |
| Lower mount | Eye, 14mm |
| Upper mount | Eye, 14mm |
| Shaft diameter | 14mm |
| Body design | 46mm ID smooth body, non-coilover |
| Internal design | Monotube |
| Gas charged | Yes |
| Reservoir | No |
| Finish | Zinc plated |
| Boot included | Yes |
| Lift height | w/0 – 1 in. lift |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2004–2015 Nissan Titan in LE, S, SE, SL, SV and XE trims.
Model years after 2015 and other Nissan models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Both ends are eye mounts, so compare the mount type and hardware with the shock you are replacing before fitting. Support the truck securely before removing the old shock.
What’s included
A Bilstein 5100 Series shock absorber with boot included. Mounting hardware is not included, so check your existing mounts before fitting.









