Overview
The Dana Spicer Bearing and Seal Kit is a differential rebuild kit that bundles the oil seals, bearings, retainer and shaft used when servicing an axle carrier. The kit includes an oil seal, an axleshaft oil seal, a ring wheel bearing retainer, a differential shaft and a taper roller bearing set. Dana Spicer labels the kit universal fit, so match its contents to your axle before installing.
The brand says its drivetrain components are precision engineered and put through rigorous testing, and that they are built to the standards it supplies to original equipment manufacturers. No specific vehicle or axle model is named for this kit.
Key features
- Bundles two oil seals, a bearing retainer, differential shaft and taper roller bearing set
- Axleshaft oil seal included for sealing the axle shaft area
- Sold as a differential rebuild kit in the Dana Spicer line
- Engineered and tested to OE-level standards.
Before you rebuild
A differential rebuild touches several parts that wear together. The carrier bearings, pinion seal and axleshaft seal all see the same gear oil, so a worn seal often means the bearings have been running with poor lubrication. Before pulling the carrier, measure the old gears and bearing play and note any heat marks or pitting on the ring and pinion teeth.
Shops usually replace the taper roller set and seals in the same visit, since reaching the carrier is the costly part of the job. Check the new differential shaft and retainer against the old parts side by side. Clean the housing thoroughly and fill with fresh gear oil at the correct level for your axle once the rebuild is closed up. Keep notes on preload readings so the next service starts from a known baseline.
Specifications
| Brand | Dana Spicer |
|---|---|
| UPC | 23913251055 |
| Kit type | Differential rebuild kit (bearing and seal kit) |
| Fitment label | Universal fit |
| Included | Oil seal, axleshaft oil seal, ring wheel bearing retainer, differential shaft, taper roller bearing set |
Vehicle fitment
The kit is universal fit, so use the axle type and the component list to judge whether it suits your differential. Confirm fit for your vehicle’s year, model and axle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Taper roller bearings and differential shaft work depend on correct preload and gear setup, so a shop familiar with axle rebuilds is the usual route for this kit.
What’s included
Oil seal, axleshaft oil seal, ring wheel bearing retainer, differential shaft and taper roller bearing set.









