Select your vehicle

Differential Overhaul Kit

Crown Automotive

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Differential overhaul kit with bearings, seals and pinion nut
  • Rear position
  • Fits Cherokee XJ and Liberty KJ

Description

Overview

The Crown Automotive C825MASKIT is a rear differential overhaul kit with bearings, seals and a pinion nut. It fits the 1991–1996 and 1999–2000 Jeep Cherokee (XJ) and the 2002–2007 Jeep Liberty (KJ).

An overhaul kit replaces the wear items for a differential rebuild in one set, so the bearings, seals and pinion nut are changed together.

Key features

  • Bearings included
  • Seals included
  • Pinion nut included
  • Rear position
  • Crown Automotive part number C825MASKIT

Rebuild planning

A differential overhaul replaces the parts that wear first, but the gears and carrier must be set up correctly for the rebuild to last. Pinion preload and ring gear backlash both need to be checked with the new bearings installed, and shims are often needed to get the setup right. Gear contact should also be checked with marking compound before the unit is closed.

Signs that a rebuild is due include whine that changes with load, fluid leaks at the pinion or axle ends, and metal in the drain fluid. Inspect the carrier bearings by hand before reassembly, and replace any that feel rough or show discoloration. Use the correct gear oil and fill to the level that the housing requires.

  • Check pinion preload with the new crush or collapsible parts
  • Set ring gear backlash before final assembly
  • Inspect the carrier bearing cups and bores
  • Replace the cover gasket and clean the housing mating surface

Specifications

Brand Crown Automotive
Part number C825MASKIT
UPC 70000503248
Position Rear
Included Bearings, seals and pinion nut

Vehicle fitment

It fits Cherokee XJ in the Base, Briarwood, Classic, Country, Laredo, Limited, SE and Sport trims, and Liberty KJ in the 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport trims.

Cherokee and Liberty years outside the listed ranges are not covered, and Grand Cherokee and Wrangler models are not on this list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

A rebuild means setting pinion preload and ring gear backlash with the new parts, which is usually a shop job with the right tools.

What’s included

It includes bearings, seals and a pinion nut.

SKU: CROC825MASKIT Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 8.00 × 6.00 × 4.50 in
brands

Fitment

VehicleYearsTrims
Jeep Cherokee (XJ)1991–1996, 1999–2000Base, Briarwood, Classic, Country, Laredo, Limited, SE, Sport
Jeep Liberty (KJ)2002–200765th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Crown Automotive C825MASKIT kit include a pinion nut?

Yes. The kit includes a pinion nut along with the bearings and seals. It is for the rear position and fits Cherokee XJ and Liberty KJ models.

Is this kit for a 2004 Jeep Liberty?

Yes, it fits the 2002 to 2007 Jeep Liberty (KJ). Confirm fit for your vehicle's year, model and trim before ordering.

Does this kit fit a Grand Cherokee?

No. The kit fits Cherokee XJ from 1991 to 1996 and 1999 to 2000, and Liberty KJ from 2002 to 2007. Grand Cherokee models are not covered, so check the year and model before ordering.

Should the carrier bearings be replaced during a rebuild?

Check them first. Turn the bearings by hand and look for roughness, play or discoloration. Any bearing that feels rough or shows wear should be replaced, since a worn carrier bearing can throw off the gear setup.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon