Overview
The Baer Brakes 6920959 is a 1-piece, slotted replacement brake rotor for the right side of select Baer Brake systems. It is a vented, full cast iron rotor with a 15 in outside diameter, a 1.18 in nominal thickness and six lug studs on a 5.5 in bolt circle.
The rotor is directional and built for one side of the vehicle. The casting uses a curved vane design intended for cooling, and it is dynamically balanced for smooth running. The casting is designed for rotor stability and resistance to distortion. Confirm the rotor matches your Baer system before ordering.
Key features
- Curved vane design intended for optimum cooling
- Full cast, one-piece construction
- Slotted surface type for the braking face
- Directional rotor built for the right side (Axle: Right)
- Dynamically balanced for vibration-free performance
- Designed for rotor stability and resistance to distortion
- Vented cast iron design
Wear and replacement timing
Brake rotors wear down over time as the pads clamp against the braking face. Each stop removes a small amount of metal, so the rotor gradually gets thinner and its surface can develop grooves, heat checks or a raised lip at the outer edge. A slotted face helps clear pad debris and gas from the contact area, which many drivers value on wet or heavy-use roads. A vented casting adds airflow between its two faces to help shed heat during repeated stops.
Because a rotor is one half of a braking pair, it is usually replaced with its matching pads and checked alongside the hub bearing and caliper slide pins. Using a new rotor against worn pads can lead to uneven contact and noise. Directional rotors also need the vane direction kept correct on each side, so the right-side part should be mounted on the right side of the vehicle only.
- Measure remaining thickness against the minimum stamped on the rotor hat
- Check for pulsation through the pedal, which can point to runout or uneven thickness
- Clean the hub face and mounting surface before installing
- Bed in new pads after installation
- Replace pads and rotors together for even wear
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920959 |
| UPC | 90127962084 |
| Construction | Full cast, one piece |
| Surface type | Slotted |
| Solid or vented | Vented |
| Directional or non-directional brake surface | Directional |
| Axle | Right |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 15 in |
| Nominal thickness | 1.18 in |
| Overall height | 2.177 in |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.5 in |
| Center hole diameter | 3.094 in |
| ABS tone ring included | No |
| Drum in hat | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is sold for select Baer Brake systems. Confirm your vehicle’s year, model and trim before ordering. Left and right rotors differ, and this one is the right-side rotor.
Confirm your vehicle’s year, model and trim before ordering. Left and right rotors differ, and this one is the right-side rotor.
Installation notes
The rotor is directional and specific to one side, so the right-side rotor belongs on the right side of the vehicle. Rotors are sold individually, so a left-side rotor needs to be ordered separately.
What’s included
One 1-piece, right-side slotted replacement brake rotor, sold as each.
Not included: Brake pads, calipers and hub hardware are not included.
