Overview
The Baer Brakes 6910523 is a one-piece left replacement brake rotor with a slotted surface, 14.000 in outside diameter and .799 in nominal thickness. It is a full cast vented design made for select Baer Brake systems, and the left-side direction matters for installation.
The rotor’s overall height is 3.366 in, with a 3.094 in center hole and a 6-hole pattern on a 5.50 in circle. It is a purpose built full cast casting with curved vanes for cooling, and it is dynamic balanced. Each unit is one rotor.
Key features
- One-piece full cast construction with a slotted surface
- Left-side directional rotor
- Six studs or lugs on a 5.50 in bolt circle
- 3.094 in center hole diameter
- Drum in hat design with a drum section inside the hat
- Curved vanes for cooling
- Dynamic balanced, cast iron, performance grade
Choosing the right hub
The hub is the foundation of a rotor installation, and a left-side directional rotor only works when the hub face, register and bolt pattern line up. Before buying, measure the existing hub, check for rust or buildup on the mounting face, and confirm which side the old rotor came from. A hub that is bent or pitted will cause the new rotor to run out, even when the part itself is correct.
Slotted rotors are often chosen for a firmer pedal feel and better clearing of pad residue, but they can wear pads faster on some vehicles. Pads designed for slotted rotors help with break-in and noise. Replace the rotor and pads together where possible, and check the wheel bearings and lug studs while the wheel is off.
- Measure the hub face and register before ordering
- Clean rust and buildup from the mounting surface
- Check bearings and lug studs while the wheel is off
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910523 |
| UPC | 90127961162 |
| Outside diameter | 14.000 in |
| Nominal thickness | .799 in |
| Overall height | 3.366 in |
| Center hole diameter | 3.094 in |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.50 in |
| Construction | Full cast, one piece |
| Surface type | Slotted |
| Rotor type | Vented |
| Drum in hat | Yes |
| Brake surface | Directional |
| Axle | Left |
| Material | Cast iron |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Quantity per unit | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems. Verify that the year, model and trim match your vehicle before buying, and check the hub, center hole and left-side direction against your brake system before mounting.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the 3.094 in center hole and 6 x 5.50 in pattern match your hub before mounting. Because the rotor is directional, install it on the left side only.
What’s included
One left-side, one-piece slotted replacement rotor.
Not included: Brake pads, calipers and mounting hardware are not included.
