Overview
The Baer Brakes 6910363 is a left-side, two-piece replacement brake rotor ring with an 11.35 inch outside diameter and 0.81 inch nominal thickness. Its surface is slotted, and it has a 12-hole mounting pattern on a 7.5 inch bolt circle. It is made for select Baer Brake systems.
The ring is cast iron with a performance grade rating and a curved vane design intended for cooling. It is dynamically balanced and directional, so it is specific to the left side only. The surface is slotted without drilling. Confirm the Baer system before purchase.
Key features
- Slotted surface finish with no drilled holes listed.
- Left-side directional brake surface.
- Two-piece construction in cast iron.
- Curved vane design intended for cooling.
- Twelve mounting bolt holes on a 7.5 inch bolt circle.
- Dynamically balanced, rated as a performance grade.
Slotted surfaces and pad contact
Slots on a brake surface give the pad edges a path to clear dust, gas and water. The slots do not drill through the ring, so the surface stays solid while still shedding debris during braking. Keep the pad material matched to the rotor and the way the vehicle is driven, since aggressive pads can wear a slotted surface faster than a plain one.
After installation, bed the new surface with a series of moderate stops so the pad transfers an even layer. Check pad wear more often for the first few hundred miles, and look for glazing or uneven wear that could indicate a stuck caliper or misaligned ring.
- Choose pad compound for the intended driving
- Inspect pads after the first few stops
- Wipe the surface clean before bedding
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910363 |
| UPC | 90127961148 |
| Sold as | Each |
| Country of origin | USA |
| Axle | Left |
| Construction | Two piece |
| Material | Cast iron |
| Grade type | Performance |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Outside diameter | 11.35 in |
| Nominal thickness | 0.81 in |
| Mounting bolt hole circle diameter | 7.5 in |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
The ring is made for select Baer Brake systems. Match the system and left-side position to your setup before purchase.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this ring on the left side only. Since the ABS tone ring is not included, keep any tone ring already fitted to your hub.
What’s included
A single left-side two-piece rotor ring, sold as Each.
Not included: ABS tone ring.
