Overview
The Baer Brakes 6929348 is a right-side replacement brake rotor with a 14.36 inch outside diameter and 1.1 inch nominal thickness. It is a two-piece vented rotor with a slotted, drilled and zinc-plated surface, made for select Baer Brake systems.
The castings are purpose built, with a curved vane design to aid cooling. The rotor is directional, so it is made for one side of the vehicle only and should be fitted on the right side. Dynamic balancing supports vibration-free running.
Key features
- Two-piece construction with a vented cast iron rotor ring
- Slotted, drilled and zinc-plated surface finish
- Curved vane design that Baer Brakes says is meant for optimum cooling
- Directional brake surface made for the right side
- Dynamic balancing for vibration-free performance
- Designed for rotor stability and resistance to distortion.
Care and maintenance
Slotted and drilled rotors are often chosen for their ability to shed water, gas and debris from the pad face. The holes and slots also create edges that can crack under sustained heat, so they are inspected for hairline cracks around the drilled holes and slot ends at each pad change.
Zinc plating protects the non-friction surfaces from rust during storage and early use, but it wears from the hat and mounting face as the rotor is installed. Clean the hub face and the rotor hat before fitting, and tighten the wheel nuts evenly in a star pattern.
- Look for hairline cracks at slot and hole edges
- Replace pads and rotors as a pair on the same axle
- Re-check wheel nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929348 |
| UPC | 844165054764 |
| Outside diameter | 14.36 inch |
| Nominal thickness | 1.1 inch |
| Bolt hole circle diameter | 8.8 inch |
| Bolt hole quantity | 12 |
| Rotor type | Two-piece vented |
| Material | Cast iron |
| Surface type | Slotted, drilled and zinc-plated |
| Brake surface | Directional |
| Axle position | Right |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made as a replacement for select Baer Brake systems, so the right match depends on your existing Baer setup. Confirm the system and axle before ordering.
Confirm your vehicle’s year, model and trim before ordering. Because the rotor is right-side only, a left-side position requires a separate left-side part.
Installation notes
Install the rotor on the right side only, since its surface is directional. Check that the 12-hole pattern on the 8.8 inch bolt circle matches your hub before fitting. The ABS tone ring is not included, so it must be obtained separately if your braking system uses one. Brake components are safety-critical, so have the installation completed and checked by a qualified technician.
What’s included
One rotor per unit.
Not included: ABS tone ring.
