Overview
The Baer Brakes 6910181 is a left-side, two-piece replacement rotor ring with a plain friction face, an 11.625 inch outside diameter and a .705 inch nominal thickness. It is used in select Baer brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Plain faces have no slots, so this version suits a buyer who wants the smooth surface from the same two-piece family. The two-piece layout separates the ring from its hat, which allows the ring to be replaced separately from the hat.
Key features
- Plain friction surface with no slots
- Two-piece construction with a separate ring
- Cast iron, Performance grade from Baer
- Curved vane design for optimum cooling
- Dynamic balanced for vibration-free performance
- Directional brake surface for the left side
- 12 bolt holes on a 7.50 inch bolt circle
Plain face or slotted face
A plain friction face has a continuous surface with no slots. Plain rotors are often chosen for a smoother contact area with the pad and for a simpler surface to inspect. Slots and vents help move gas and debris away from the pad, so the choice depends on how the vehicle is used and which pad compound is fitted.
Whichever face you choose, the rotor should match the rest of the brake assembly. Check the hat, bolt pattern and the side the rotor is built for before buying. Keep the ring and hat faces clean during installation, because rust or debris between them can cause runout and pulsing.
- Measure the ring against your current rotor before ordering
- Clean the hub face and hat contact area before fitting
- Replace hardware clips and fasteners that show wear
- Check pad thickness when the ring is changed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910181 |
| UPC | 844165053392 |
| Axle | Left |
| Construction | Two-piece |
| Surface type | Plain |
| Brake surface | Directional |
| Solid or vented | Vented |
| Material | Cast iron |
| Outside diameter | 11.625 inch |
| Nominal thickness | .705 inch |
| Bolt hole circle diameter | 7.50 inch |
| Bolt hole quantity | 12 |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is used in select Baer brake systems, so confirm the diameter, the 12-hole 7.50 inch bolt pattern and the two-piece design against your current rotor before buying.
Confirm your vehicle’s year, model and trim before ordering.
A right-side application needs a right-side rotor, so confirm the side first.
Installation notes
Install the left rotor only on the left side, since the brake surface is directional. The ABS tone ring is not included, so use the tone ring from your existing hardware if the system needs one. A brake technician should check the fit before first use.
What’s included
One left two-piece plain-face rotor ring, sold as each.
Not included: the rotor hat and the ABS tone ring.
