Overview
The Baer Brakes 6920091 is a plain finish, one-piece replacement brake rotor for the right side of select Baer Brake systems. It is a vented cast iron rotor, 12.000 inch in outside diameter with .810 inch nominal thickness, fitted with a short hat and 5 studs on a 4.50 inch bolt circle.
The friction surface is plain, with no slots or drilled holes. The rotor is directional, so it fits one side of the vehicle only. Curved vanes support cooling, and the casting is dynamically balanced to reduce vibration.
Key features
- Plain friction surface with no slots or drilled holes
- Vented one-piece full cast iron construction
- Curved vane design intended for cooling
- Dynamic balancing for vibration-free running
- Directional right-side rotor with short hat
Choosing the right setup
A plain friction face is the simplest design. It wipes clean easily and works well with a wide range of pad compounds, so the choice of pads matters more than the surface pattern for everyday driving.
Plain rotors are a practical choice for street and light off-road use where the brakes do not see extreme heat. Pair the rotor with pads rated for the way the vehicle is driven, and bed the new pads in gradually after installation.
Before ordering, compare the hat style and center bore against the hub you own. A mismatch in these dimensions can keep the rotor from seating flat, which leads to vibration even when the rotor itself is in good condition.
- Match pads to the way the vehicle is driven
- Bed in new pads after the rotor is installed
- Clean the hub face before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920091 |
| UPC | 844165036050 |
| Axle position | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Plain |
| Brake surface | Directional |
| Outside diameter | 12.000 inch |
| Nominal thickness | .810 inch |
| Overall height | 1.988 inch |
| Stud/lug count | 5 |
| Stud/lug bolt circle | 4.50 inch |
| Center hole diameter | 2.783 inch |
| Hat style | Short hat |
| Grade type | Performance |
| ABS tone ring included | No |
| Drum in hat | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rotor is side-specific, so the right hub is the only correct location. Verify the 5 x 4.50 inch pattern and 2.783 inch center bore first, since a mismatch prevents proper seating.
What’s included
One plain finish right-side replacement rotor, sold individually.
Not included: ABS tone ring.
