Overview
The Baer Brakes 6921097 is a 2-piece, slotted right-side replacement brake rotor for select Baer Brake systems. It has a 14.000 inch outside diameter, a 1.250 inch nominal thickness and 12 mounting holes on an 8.320 inch bolt circle.
The rotor is directional, so this right-side part is made for one side of the vehicle only. Its vented cast-iron body uses a two-piece layout and carries Baer’s performance grade, intended for owners replacing a right-side rotor in a compatible system.
Key features
- Two-piece design with the friction ring separate from its mount
- Slotted friction surface
- Curved vanes that aid cooling
- Dynamically balanced to reduce vibration
- Purpose-built castings from premium materials
- Engineered for stability and distortion resistance
Slotted surfaces and pad bedding
Slotted friction surfaces help clear debris and gases from the pad interface. Their edges can wear pads faster than a plain face, so pad choice matters. Bedding in new pads and rotors gradually transfers an even layer of friction material, which supports smooth braking and reduces noise. Use a gradual bedding procedure rather than an aggressive first stop.
A two-piece rotor relies on its ring and mounting hat staying flush and secure, so check the attachment after the first few hard stops. Keep brake lines, caliper slides and wheel bearings in good condition too, since play in those parts shows up as uneven rotor wear. Avoid hosing hot rotors with cold water, which can crack the friction surface.
- Bed in new pads gradually before heavy use
- Check slots for packed debris and clean them
- Inspect caliper slide pins during rotor service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6921097 |
| UPC | 90127962145 |
| Axle | Right |
| Construction | Two piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Slotted |
| Brake surface | Directional |
| Outside diameter | 14.000 inch |
| Nominal thickness | 1.250 inch |
| Mounting bolt holes | 12 |
| Mounting bolt hole circle diameter | 8.320 inch |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Quantity | Each |
| Country of origin | USA |
Vehicle fitment
The rotor is intended for select Baer Brake systems. Confirm which systems apply to your vehicle’s year, model and trim before ordering.
Match the right-side orientation and the 12 x 8.320 inch bolt circle to your hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A directional right-side two-piece rotor should only go on the right. Check the ring-to-hat fit on your hub before installation, since two-piece designs differ from one-piece rotors. The left side needs its own rotor because rotors are listed one at a time.
What’s included
One right-side two-piece slotted rotor ring.
Not included: the left-side rotor, pads, calipers and mounting hardware.
