Overview
The Baer Brakes 6920331 is a right-side replacement brake rotor in a 1-piece tall hat design with a plain friction face. It measures 12.000 inch across and 1.100 inch thick, and it is made for select Baer Brake systems. This rotor has no listed vehicle fitment.
A plain face has no slots and no drilled holes. The body is vented and full cast from cast iron, with a 2.781 inch center hole that locates it on the hub and a 5 x 4.50 inch stud pattern for mounting. The directional brake surface ties this rotor to the right side of the vehicle.
Key features
- Plain friction face with no slots or drilled holes
- Vented, full cast body in cast iron
- Curved vane design intended to aid cooling
- Purpose-built castings in cast iron
- Engineered to resist distortion and hold rotor stability
- Dynamic balanced for vibration-free running
- Directional, right-side design
Plain faces and braking feel
A plain friction face is the simplest surface on a brake disc. Without slots or drilled holes, it does not add channels for gas or debris, so the pads sit on a continuous surface from the first stop to the last. Many drivers choose a plain face for quiet, predictable operation on the street, where the pad compound and rotor finish do most of the work.
Plain faces still wear. Look for even wear across the face, and check for a raised lip at the outer edge, which signals that pads have been cutting into the rotor. Keep the hub clean and the rotor free of grease during installation, and wipe the disc of any oil before first use. Pair a plain rotor with pads suited to your driving, since pad choice has a larger effect on noise than the face alone.
- Even wear across the friction face
- A raised lip at the outer edge means replacement is due
- Keep grease away from the friction surface
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920331 |
| UPC | 844165037132 |
| Axle side | Right |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.228 |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 inch |
| Center hole diameter | 2.781 inch |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The 6920331 is made for select Baer Brake systems. As a right-side rotor sized 12.000 inch by 1.100 inch with a 5 x 4.50 inch bolt pattern, match it to your brake hardware before ordering.
Confirm your vehicle’s year, model and trim before ordering. A left-side application needs the separate left rotor.
Installation notes
Fit this rotor only on the right side, because the directional design is not reversible. Left-side rotors are a separate item and need to be ordered as their own part. Brake work is safety-critical, so test the pedal at low speed before normal driving.
What’s included
The replacement brake rotor only, sold individually.
Not included: The ABS tone ring is not included with this rotor. Confirm the bolts and fasteners your application needs before installation.
