Overview
The Baer Brakes 6920351 is a right-side, 2-piece slotted replacement brake rotor with an 11.000 inch outside diameter and a 1.020 inch nominal thickness. Baer Brakes made it for certain Baer Pro Plus systems and other Baer Brake systems, and it comes as a single rotor for one side of the axle.
Replacing a rotor means matching its diameter, thickness and bolt pattern to the hub and caliper already on the vehicle. This one has ten bolt holes on a 6.40 inch circle and a vented body with a slotted friction face. The ring is a performance grade cast iron casting with curved vanes that move air through the rotor to help it cool.
Key features
- Two-piece construction with a cast iron rotor ring
- Slotted friction surface for the right side
- Vented design with curved cooling vanes
- Directional brake surface made for one side only
- Dynamically balanced to reduce vibration
- Castings made from materials Baer Brakes calls premium
Before you buy
Brake rotors wear with use. Surface scoring, uneven thickness and a pulsing pedal are common signs that the ring needs replacing or resurfacing. Before ordering, measure the old rotor and compare it with the new one, paying close attention to thickness and the hub face. A rotor that is thin for its diameter can overheat and warp more easily.
Slotted faces help clear debris and gas from the pad surface, but they wear pads at a different rate than a plain face. Pads designed for slotted rotors are usually the better match. Replace pads, hardware and the opposite side together when possible so both sides brake evenly. Keep wheel bearings and caliper slides in good order, since they affect how the rotor sits and wears.
After installation, bed in the pads at moderate speed and avoid heavy braking until the surface has conditioned. Re-check the hub bolts after the first few runs, and inspect the friction surface periodically for cracks and hot spots.
- Measure thickness against the old part’s minimum marking
- Match pad compound to a slotted face
- Bed in pads gradually after installation
- Inspect for cracks and blue discoloration
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920351 |
| UPC | 90127961988 |
| Construction | Two piece |
| Rotor type | Vented |
| Surface type | Slotted |
| Axle side | Right |
| Brake surface | Directional |
| Outside diameter | 11.000 in |
| Nominal thickness | 1.020 in |
| Bolt hole quantity | 10 |
| Bolt hole circle diameter | 6.40 in |
| Material | Cast iron |
| Grade | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is intended for certain Baer Pro Plus systems and other Baer Brake systems. Match your year, model and trim to those applications before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rotor is directional and side-specific, so the right-side ring mounts only on the right side of the vehicle. Check the ten-hole bolt pattern against the existing hub before fitting it, and treat a left-side ring as a separate item.
What’s included
One right-side 2-piece slotted rotor ring, sold as each.
Not included: the left-side rotor and the ABS tone ring.
