Overview
The Baer Brakes 6929099 is a right-side, plain-finish replacement brake rotor measuring 12.000 inch across with a 1.020 inch nominal thickness. It is a one-piece, full cast iron vented rotor made for select Baer Brake systems, and its directional design means it is meant for the right side of the vehicle only.
Replacement rotors take the place of a worn or damaged disc on the hub, and the vented core helps the rotor shed heat during repeated stops. Owners of compatible Baer systems who need a plain right-side rotor will find the bolt pattern, center register and balance details in the specifications below. Verify compatibility for your vehicle’s year, model and trim before you buy.
Key features
- Purpose built castings made from premium materials
- Curved vane design intended to improve cooling
- Engineered for rotor stability and resistance to distortion
- Dynamic balanced for vibration-free performance
- Directional brake surface specific to the right side
Before you install a rotor
A brake rotor wears as the pads grind across its friction surface, and it can develop a lip at the outer edge, uneven thickness or heat cracks over time. Before fitting a new one, inspect the hub face, wheel studs and bearing for play, and clean any rust from the mounting surface so the rotor sits flat. Pads are commonly replaced at the same time, and the pad material should suit the surface finish and your driving.
On a directional rotor, the orientation matters, so keep the right-side part on the right hub and check the fit before tightening. Torque the lug nuts in a star pattern and re-check them after the first few stops. Brake fluid, calipers and brake lines are worth a look at the same time, since a worn caliper can cause uneven rotor wear.
- Clean rust from the hub face before mounting
- Re-check lug nut torque after the first stops
- Inspect the bearing for play before fitting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929099 |
| UPC | 90127962251 |
| Side | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.020 inch |
| Overall height | 2.406 |
| Solid or vented | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 inch |
| Center hole diameter (register) | 2.836 inch |
| ABS tone ring included | No |
| Drum in hat | Yes |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Quantity | 1 rotor |
Vehicle fitment
This rotor suits select Baer Brake systems only. Match your year, model and trim to the system before ordering.
Because the rotor is directional, a right-side part is not meant for the left hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit this rotor only on the right-side hub, since the directional surface is made for one side. The rotor is listed without an ABS tone ring, so check whether your hub already carries one before assembly. Brake components affect stopping, so have a qualified technician install the rotor and test the brakes before the vehicle is driven.
What’s included
One 1-piece replacement brake rotor, right side, plain finish, Baer Brakes part number 6929099.
