Overview
The Baer Brakes 6920201 is a right-side, 1-piece vented replacement brake rotor with a slotted surface and a short hat, measuring 11.35 inch outside diameter and 0.81 inch nominal thickness. It is made for select Baer Brake systems and is directional, so it is built for the right side of the vehicle only.
The casting is made from premium material and is purpose built as a full cast, one-piece rotor. A curved vane design supports cooling, and the rotor is dynamically balanced for smooth running. The 1.988 inch overall height is the short-hat dimension. The rotor is sold individually, so the left-side rotor is a separate item.
Key features
- Purpose built, full cast one-piece construction from premium material
- Curved vane design for cooling
- Dynamically balanced for vibration-free running
- Slotted surface finish
- Vented rotor with a short hat and 1.988 inch overall height
- Directional right-side rotor, axle position right
- Cast iron with Performance grade rating
Signs the rotor needs replacing
A brake rotor works with the pads, calipers and hub to slow the wheel, so wear in one part shows up in the others. Over time the friction surface thins, and the face can develop grooves, heat checks or a pulsing feel at the pedal. Slotted faces help move debris and gas away from the pad, but they can wear pads at a different rate than plain faces, so pad choice should follow the way the vehicle is driven.
Before installing a new rotor, clean the hub face and remove any rust from the mounting surface so the rotor sits flat. Replace rotors in pairs on the same axle when wear is uneven, since mismatched braking can pull the vehicle to one side. After the first few stops, check for pulsing and recheck lug nut torque.
- Clean the hub face before fitting
- Replace rotors in pairs on the same axle
- Bed in new pads with moderate stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920201 |
| UPC | 90127961834 |
| Sold as | Each |
| Axle | Right |
| Rotor type | Vented, one-piece full cast |
| Surface type | Slotted |
| Directional or non-directional | Directional |
| Outside diameter | 11.35 inch |
| Nominal thickness | 0.81 inch |
| Overall height | 1.988 inch |
| Center hole diameter | 2.78 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Export description | Brake Components |
| Country of origin | USA |
Vehicle fitment
Match the 11.35 inch diameter, 5 x 4.75 inch bolt pattern and 2.78 inch center bore against your hub, and confirm which Baer Brake systems this right-side rotor is made for before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fit this rotor on the right-hand hub only, and check the directional orientation before bolting it on. No ABS tone ring is included, so keep the ring already on your hub if the system uses one. Use the 2.78 inch center bore to locate the rotor, and confirm the hub lug pattern is 5 x 4.75 inch before installation.
What’s included
One 1-piece right-side replacement rotor, sold individually.
Not included: the left-side rotor, which is a separate part for the opposite side of the vehicle.
