Overview
The Baer Brakes 6920975 is a 13 inch, 1-piece plain finish replacement brake rotor for the right side of select Baer Brake systems. It is a vented, directional cast iron rotor, 0.81 inch thick, with five lug holes on a 4.75 inch bolt circle, so compare that hub pattern with your Baer setup before ordering.
Baer builds this rotor as a single full-cast piece, with no separate ring to assemble. The part is handed for one side of the vehicle, so it belongs only on the right. The plain surface suits a straightforward replacement, and rotors are sold one at a time.
Key features
- Right-side directional rotor, specific to one side of the vehicle.
- Curved vane design, which Baer says is meant to improve cooling.
- The rotor is built for stability and resistance to distortion.
- Dynamic balanced for vibration-free running.
- Plain surface with no drum in the hat.
Choosing a replacement pair
Brake rotors wear at the friction face and can develop a lip at the edge of the braking surface over time. Before replacing one, check the old rotor’s thickness against its minimum stamp, look for deep grooves and heat cracks, and inspect the hat for corrosion. Uneven wear often shows up as pulsation under braking, which points to a rotor that needs replacing.
Because one rotor only covers one side, many owners replace both sides together so braking stays even. Pads, hardware and the hub face should be inspected at the same time, since a worn pad can damage a new rotor quickly.
- Measure runout and thickness before fitting
- Clean the hub face and mating surface thoroughly
- Replace corroded hardware along with the rotor
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920975 |
| UPC | 844165037583 |
| Outside diameter | 13 inch |
| Nominal thickness | 0.81 inch |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 inch |
| Center hole diameter | 2.78 inch |
| Overall height | 2 |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle | Right |
| Surface type | Plain |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Do not fit this right-side rotor on the left, and confirm the 5-lug, 4.75 inch pattern against your hub. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional, so match the right-axle designation to the right side of your Baer system before mounting. Only one rotor is supplied, so replacing a pair means ordering a second part for the opposite side. Brake work is safety-critical; have a qualified technician verify the installation.
What’s included
One replacement rotor, sold individually.
Not included: brake pads, calipers and other brake hardware, since only the rotor is sold.
