Overview
The Baer Brakes 6920199 is a right-side, 1-piece vented replacement brake rotor with a plain surface finish and a short hat. It measures 11.35 inch outside diameter and 0.81 inch nominal thickness, and Baer Brakes makes it for select Baer Brake systems.
The castings are built from premium materials. Curved vanes support cooling, and the casting is dynamically balanced for vibration-free performance. The 1.988 inch overall height gives it the short-hat design, and the directional pattern means this part number covers only the right side.
Key features
- Plain surface finish with no slots
- Curved vane design intended for cooling
- Dynamically balanced casting
- Full cast one-piece construction from premium material
- Short hat at 1.988 inch overall height
- Directional right-side application
- Cast iron with Performance grade rating
Plain versus slotted faces
A plain face keeps the friction surface continuous, which suits many street applications where debris build-up is light. It does not vent pad dust or water as quickly as a slotted face, so pads may glaze during long or repeated hard stops. Pad compound matters as much as the rotor face, so match the pad to how the vehicle is driven.
Plain faces are simple to inspect. Look for scoring, blue discoloration and a lip at the outer edge, which signal uneven wear. Clean the face with brake cleaner before fitting new pads, and avoid touching the friction surface with bare hands because skin oils can cause noise and reduced stopping power.
- Inspect for scoring and blue discoloration
- Clean the face before fitting pads
- Replace pads and rotors together when wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920199 |
| UPC | 844165036722 |
| Sold as | Each |
| Axle | Right |
| Rotor type | Vented, one-piece full cast |
| Surface type | Plain |
| Directional or non-directional | Directional |
| Outside diameter | 11.35 inch |
| Nominal thickness | 0.81 inch |
| Overall height | 1.988 inch |
| Center hole diameter | 2.78 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Export description | Brake Components |
| Country of origin | USA |
Vehicle fitment
Match the 5 x 4.75 inch bolt pattern and 2.78 inch hub register to your hub, and confirm the Baer Brake system it suits before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the rotor is mounted on the right side, since the directional design only works in that position. Center the rotor on the 2.78 inch hub register before tightening the fasteners, and keep any existing ABS tone ring in place because none is supplied with the rotor.
What’s included
One plain-finish, 1-piece right-side replacement rotor, sold individually.
Not included: the left-side counterpart, which is a separate rotor.
