Overview
The Baer Brakes 6929252 is a slotted, right-side 2-piece replacement brake rotor with a 14.36 inch outside diameter and 1.1 inch nominal thickness. It is a vented cast iron rotor ring for select Baer Brake systems, sold as each rotor, and it is directional, so it is made for one side of the vehicle.
The rotor has 12 mounting holes on an 8.8 inch bolt circle diameter, and it uses a stepped flange hub. Its brake surface is slotted. Compare the diameter and bolt pattern with your current hub before choosing it.
Key features
- Slotted brake surface.
- Two-piece vented cast iron ring.
- Directional design for the right side only.
- Curved vanes inside the ring move air through the rotor to help it cool.
- The castings are purpose built for this application.
- Balanced dynamically to reduce vibration.
- Performance grade type.
Slotted rotors and pad wear
Slots cut into a rotor’s braking surface give the pad edges something to grip, and they let gas and debris escape from between the pad and the rotor. The result is a surface that stays cleaner than a plain rotor under repeated stops, but slots can also increase pad wear in some setups. Pad compound, driving style and vehicle load decide how much difference the rotor makes.
When the rotor is worn, the slot edges and friction surface wear down together, and the outer edge may develop a lip. Check for thickness loss, cracking near the vanes, and heat spots. Mount the rotor on a clean hub, check runout, and tighten the lug nuts in a star pattern. Replace the pads with the rotor so the new surface beds in against new friction material.
- Inspect slot edges for chipping
- Check runout before installation
- Tighten lug nuts in a star pattern
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929252 |
| UPC | 90127962435 |
| Axle side | Right |
| Construction | Two piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Slotted |
| Brake surface | Directional |
| Outside diameter | 14.36 inch |
| Nominal thickness | 1.1 inch |
| Bolt hole circle diameter | 8.8 inch |
| Bolt hole quantity | 12 |
| Hub style | Stepped flange |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This rotor is a replacement for select Baer Brake systems. Match the 14.36 inch diameter, 12-hole pattern and right-side orientation to the hub on your vehicle, and check your year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount only on the right side, because the rotor is directional. Keep the existing ABS tone ring or source a separate one, since the ring is not in the kit. Check runout before the vehicle returns to service.
What’s included
One slotted right-side 2-piece replacement rotor ring, sold individually.
Not included: ABS tone ring.
