Overview
The Baer Brakes 6919222 is a left-side, 2-piece replacement brake rotor with a slotted finish, measuring 14.950 inch in outside diameter and 1.330 inch in nominal thickness. It is made for select Baer Brake systems, and each rotor comes individually, so the opposite side needs its own part.
Baer Brakes designed this vented rotor as a directional performance replacement. A curved vane design is meant to help cooling, and each rotor is dynamic balanced for vibration-free running. Owners who need a left-side replacement rotor for a compatible Baer brake system will find the dimensions, construction and included items below.
Key features
- Left-side rotor with a directional brake surface, so it must be fitted on the left side
- Two-piece construction with a slotted surface finish
- Curved vane design for cooling
- Purpose built cast iron castings made from premium materials
- Designed for rotor stability and resistance against distortion
- Dynamic balanced for vibration-free performance
- Vented rotor with 12 mounting bolt holes on an 8.50 inch bolt circle
Choosing a slotted rotor
A slotted rotor has grooves cut into the braking face. The grooves give pads a way to shed gas, water and worn pad material, which some drivers prefer for wet or dusty conditions. The trade-off is that slots can increase pad wear and may add noise when pads are not matched to the rotor.
Before choosing this type, consider how the vehicle is used. Daily street driving usually does not need the extra venting, while towing or repeated hard stops put more heat into the braking system. Match the rotor to your vehicle’s year, model and trim, and keep the pads and rotor from the same system so the friction surfaces work together. Have the installation checked by a qualified technician.
- Slots shed gas and water from the pad face
- Pad compound should suit a slotted face
- Check for pulsing after the first stops
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919222 |
| UPC | 90127961544 |
| Axle | Left |
| Construction | Two piece |
| Brake surface | Directional |
| Surface type | Slotted |
| Rotor type | Vented |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 14.950 inch |
| Nominal thickness | 1.330 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.50 inch |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Quantity | Each |
Vehicle fitment
It is made for select Baer Brake systems. Confirm your vehicle’s year, model and trim before ordering, and match the 12 x 8.50 inch bolt circle to your setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the brake surface is directional, confirm the rotor is for the left side before mounting it, and do not swap it with the right-side rotor. The ABS tone ring is not included, so keep any tone ring already on your hub. Brake rotors are safety-critical, so have the installation checked by a qualified technician.
What’s included
One left-side 2-piece slotted replacement rotor ring.
Not included: The right-side rotor, since rotors are supplied individually, and an ABS tone ring.
