Overview
The Baer Brakes 6920919 is a two-piece replacement brake rotor ring with a 13.000 inch outside diameter and a slotted finish, made for the right side of certain Baer Pro Plus and other Baer Brake systems. In a two-piece rotor, the ring is the friction portion the pads grip, so this part is the disc that does the braking. It is vented, cast iron, and sold as each.
The ring uses a curved vane design intended for optimum cooling, and it is dynamically balanced. It is directional and specific to one side of the vehicle, and this item is the right-side ring. Its 12 mounting bolt holes sit on an 8.50 inch circle. Confirm the ring against your Baer system before ordering.
Key features
- Two-piece construction with a separate rotor ring
- Slotted surface finish
- Curved vane design, which Baer describes as optimum cooling
- Dynamic balanced for vibration-free performance
- Cast iron material with Performance grade type
- Directional, right-side (axle: Right) ring
Hub and ring compatibility
A two-piece rotor separates the friction ring from the hat, so the hat’s bolt pattern, mounting face and fasteners all decide whether the assembly runs true. Before mounting the ring, clean the contact surfaces and check the hat for cracks, corrosion and flat spots. A ring that sits unevenly on a hat can cause pulsing and uneven pad wear.
Fasteners deserve attention when a ring is changed. Use new hardware where the old pieces show stretching or thread damage, and tighten them in a crisscross pattern to the vehicle’s specification. Pad selection also matters, since a slotted ring can wear pads faster than a plain face when the compound is too hard for the way the vehicle is driven.
- Inspect the hat for cracks and corrosion
- Check the mounting face for flatness before assembly
- Replace fasteners that show stretching or thread damage
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920919 |
| UPC | 90127962077 |
| Construction | Two-piece |
| Side | Right (axle: Right) |
| Surface type | Slotted |
| Brake surface | Directional |
| Solid or vented type | Vented |
| Outside diameter | 13.000 inch |
| Nominal thickness | 0.81 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.50 inch |
| Material | Cast iron |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The ring is designed for certain Baer Pro Plus and other Baer Brake systems, so the match is made at the system level rather than by year and model.
Confirm your vehicle’s year, model and trim before ordering. Check that the 12-hole, 8.50 inch pattern matches your hub and Baer system.
Installation notes
Because this is a two-piece ring, confirm it is the correct match for your Baer hub before mounting it. The ABS tone ring is not included. Brake parts are safety critical, so have a qualified technician check fitment and installation.
What’s included
One two-piece replacement rotor ring, sold as each.
Not included: ABS tone ring and the left-side ring, which is sold individually.
