Overview
The Baer Brakes 6929093 is a right-side replacement brake rotor with a slotted, drilled and zinc-plated surface, 12.000 inch in diameter and 1.020 inch thick. It is a one-piece, full cast iron vented rotor for select Baer Brake systems, and its directional surface makes it a right-side part only.
The rotor is offered for 5 x 4.50 inch and 5 x 4.75 inch bolt circles, with a 2.780 inch register. Slots, drilled holes and zinc plating are the visible surface features. Measure the hub before ordering to confirm which pattern applies.
Key features
- Slotted, drilled and zinc-plated surface
- Castings made for purpose from premium materials
- Curved vane design for better cooling
- Built for stability and resistance against distortion
- Dynamic balanced for smooth running
- Directional surface for the right side only
Measuring hub and bolt pattern
Measuring the hub is the first step with a rotor offered in more than one bolt circle. Measure from the center of one stud to the stud directly across the hub for the bolt circle, and measure the inside diameter of the hub bore to compare with the register. Measure with calipers and take readings at more than one point to catch any wear or damage.
Zinc plating protects the surface from rust, but it should be kept intact by avoiding wire brushes and abrasive pads on the friction face. Clean the register surface and remove any rust before fitting, and check hub face runout before tightening the lug nuts.
- Measure the stud circle from stud center to stud center
- Clean rust from the register before fitting
- Avoid wire brushes on the friction surface
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929093 |
| UPC | 844165050001 |
| Side | Right |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.020 inch |
| Overall height | 2.406 |
| Solid or vented | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 inch and 4.75 inch (both stated) |
| Center hole diameter (register) | 2.780 inch |
| ABS tone ring included | No |
| Drum in hat | Yes |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Quantity | 1 rotor |
Vehicle fitment
Select Baer Brake systems are the intended application. Match your year, model and trim to the system, and match the 5 x 4.50 inch or 5 x 4.75 inch pattern to the hub.
Use this right-side, directional rotor only on the right side. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bolt pattern is given as both 5 x 4.50 inch and 5 x 4.75 inch, so measure the hub before mounting the rotor on the right side. Let a qualified technician fit the rotor and confirm brake performance prior to any driving.
What’s included
One slotted, drilled and zinc-plated 1-piece replacement rotor, right side, part number 6929093.
