Overview
The Baer Brakes 6910361 is a left-side, two-piece replacement brake rotor ring measuring 11.35 inches across the outside and 0.81 inch thick. Its plain finish has no slots or drilled holes, and it is made for select Baer Brake systems. Buyers who want a plain left ring in this size can compare the specifications below.
The ring is cast iron with a performance grade rating and a curved vane design intended for cooling. It is dynamically balanced for smooth running and is directional, so it fits one side of the vehicle only. Verify the Baer system before ordering.
Key features
- Plain surface finish, with no slots or drilling listed.
- Left-side directional brake surface.
- Two-piece construction in cast iron.
- Curved vane design intended for cooling.
- Twelve mounting bolt holes on a 7.5 inch bolt circle.
- Dynamically balanced, rated as a performance grade.
Plain surfaces for street and trail
A plain friction surface has no slots or drilled holes, so it presents a continuous face to the pad. That simplicity makes it easier to clean and inspect, since there are fewer edges where dirt and debris can collect. Plain rings are a common choice when the owner wants a smooth, predictable pad contact and fewer surface features to check over time.
Surface condition matters more than the pattern. Look for scoring, heat checking and a lip at the outer edge when the pads are changed. Clean the surface with brake cleaner before installation and bed the pads with a series of moderate stops so the friction material transfers evenly.
- Clean the new surface before installing
- Look for heat checks during pad changes
- Replace pads and rotors as a set when wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910361 |
| UPC | 844165012146 |
| Sold as | Each |
| Country of origin | USA |
| Axle | Left |
| Construction | Two piece |
| Material | Cast iron |
| Grade type | Performance |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Outside diameter | 11.35 in |
| Nominal thickness | 0.81 in |
| Mounting bolt hole circle diameter | 7.5 in |
| Mounting bolt hole quantity | 12 |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
This ring is made for select Baer Brake systems. Check your Baer system and left-side position before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount the ring on the left side only and confirm the vane direction matches the directional surface. The tone ring is not included with the ring, so retain the one already on the hub.
What’s included
A single left-side plain-finish ring, sold as Each.
Not included: ABS tone ring.
