Overview
The Baer Brakes 6921101 is a right-side replacement brake rotor with a 12 inch outside diameter, a 1.02 inch nominal thickness and five lug holes on a 5 inch circle. It is a one-piece, full cast, vented disc with a plain finish, made for select Baer Brake systems. Rotors are sold individually, and this right-side part is directional, so it belongs on the right side of the vehicle.
The casting is purpose built from premium materials. The curved vane design supports cooling, and the rotor is dynamically balanced for vibration-free running. It is designed for stability and resistance to distortion.
Key features
- Purpose built castings made from premium materials
- Curved vane design for cooling
- Designed for rotor stability and resistance against distortion
- Dynamic balanced for vibration-free performance
- One-piece full cast construction with a plain surface type
Before you buy
Rotors are wear parts, and replacement is usually needed when the braking surface shows deep grooves, cracks or heat checking. A pulsing pedal or a shudder under braking often points to thickness variation or runout rather than a worn pad. Because this rotor is a right-side part, confirm the side before you start so you do not install a mirror-image piece by mistake.
Plain-surface rotors are a common choice for street use, where quiet operation and steady pad contact matter. Pads, bearings and hub hardware should be inspected while the wheel is off. Replacing a rotor on one side alone can leave braking balance uneven, so many owners service both sides together.
- Check for cracks around the hub and friction face
- Inspect wheel bearings while the hub is exposed
- Replace both sides together when one side is worn
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6921101 |
| UPC | 90127962152 |
| Axle side | Right |
| Outside diameter | 12 in |
| Nominal thickness | 1.02 in |
| Overall height | 2.406 in |
| Center hole diameter | 2.78 in |
| Stud/lug hole circle diameter | 5 in |
| Stud/lug hole quantity | 5 |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is made for select Baer Brake systems. Compare the 12 inch diameter, 1.02 inch thickness and 5 lug, 5 inch circle pattern against your existing hardware before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotor is directional and specific to one side of the vehicle, so check that this is the right-side part before fitting it. Brake work should be done by a qualified technician.
What’s included
One rotor per sale, sold as each and sold individually.
