Overview
The Baer Brakes 6910198 is a left-side, 1-piece replacement brake rotor with a tall hat, a slotted, drilled and zinc-plated surface, an 11.35 inch outside diameter and a 2.213 inch overall height. It is sold individually for select Baer Brake systems.
This vented cast iron rotor has a full cast, one-piece build with a curved vane design for cooling and dynamic balancing. The slots and drilled holes help manage heat and debris at the friction surface, and the zinc plating protects the hat and rotor. Use the measurements below to check the rotor against the one you are replacing.
Key features
- Slotted and drilled friction surface with zinc-plated finish
- Tall-hat design with a 2.213 inch overall height
- Full cast, one-piece vented construction
- Curved vane pattern that Baer says improves cooling
- Directional rotor built for the left side only
Slotted and drilled care
Slotted and drilled rotors cut channels and holes through the friction surface. Those openings give gas and dust a path away from the pad, which can help the contact face stay clean during repeated stops. The same openings also collect dirt, so the rotor needs regular cleaning after muddy or sandy use.
Pads matter as much as the rotor. A harder pad can wear a slotted face faster, and a soft pad may leave residue in the openings. Match the pad compound to how the vehicle is driven, and bed in new pads gradually after installation so the friction material transfers evenly.
- Rinse mud and grit from the slots after off-road runs
- Check drilled holes for cracks around their edges
- Look for uneven pad transfer or glazing
- Replace pads and rotors together when wear is uneven
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910198 |
| UPC | 844165034667 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Solid or vented type | Vented |
| Surface type | Slotted, drilled and zinc plated |
| Outside diameter | 11.35 in |
| Nominal thickness | 0.81 in |
| Overall height | 2.213 in |
| Center hole diameter | 2.78 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 in |
| Axle | Left |
| Brake surface | Directional |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
No vehicle year, make or model is tied to part 6910198. It is made for select Baer Brake systems, so compatibility depends on the specific system.
Confirm your vehicle’s year, model and trim before ordering. Match the 2.213 inch overall height and the 5 x 4.75 inch bolt pattern to your existing Baer rotor.
Installation notes
Slotted and drilled rotors are directional here, so confirm this is the left-side rotor before it goes on. Check the tall hat height against the old rotor, since a mismatch can affect pad contact. Rotors are sold individually, so a pair requires two purchases.
What’s included
One left-side slotted, drilled and zinc-plated replacement rotor, Baer Brakes part 6910198.
Not included: the right-side rotor, brake pads, calipers and hub hardware.
