Overview
The Baer Brakes 6920382 is a right-side, 1-piece replacement brake rotor measuring 11.625 inch in outside diameter and 0.790 inch thick. Its surface is slotted and drilled, with a zinc-plated finish. It is designed for select Baer Brake systems and is sold as each.
This drum-in-hat style rotor is vented and built from full cast iron. A curved vane layout supports cooling, and the rotor is dynamically balanced to keep vibration low. Its directional design is made for the right side of the vehicle. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Right-side rotor for select Baer Brake systems
- Slotted and drilled surface with a zinc-plated finish
- Vented, full cast, one-piece construction
- Drum-in-hat design
- Curved vane layout for cooling
- Dynamically balanced for smooth running
- 5 x 5.00 inch bolt pattern with a 3.072 inch center hole
Slotted rotors and pads
Slots and drilled holes help keep the pad face clean and let gases and water escape, which many drivers value for spirited or wet-weather driving. They also add edges that can crack under heavy heat, so inspect the rotor for hairline cracks around the holes. Zinc plating protects the exposed iron from surface rust during storage, while the braking surface itself wears through contact with the pads.
Pad choice matters with a slotted rotor. A very hard pad can wear the disc faster and may cause noise, while a pad compound suited to performance use generally matches the rotor better. Bed in new pads carefully, and avoid long downhill braking straight after installation until the friction material has transferred evenly.
- Look for hairline cracks around slots and drilled holes
- Check pad compound against your driving style
- Clean rust film from the hub face before mounting
- Re-check wheel nut torque after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920382 |
| UPC | 844165037224 |
| Outside diameter | 11.625 inch |
| Nominal thickness | 0.790 inch |
| Overall height | 2.325 inch |
| Stud/lug bolt circle diameter | 5.00 inch |
| Stud/lug quantity | 5 |
| Center hole diameter | 3.072 inch |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Axle | Right |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This rotor is made for select Baer Brake systems. Match the 11.625 inch diameter, 5 x 5.00 inch bolt circle and right-side orientation to your own brake setup before installing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Mount this rotor on the right side only. No ABS tone ring is included, so plan to reuse or source one if your system depends on it. Brakes are safety-critical, so have the job checked by a technician familiar with Baer systems.
What’s included
One right-side replacement rotor, sold as each.
Not included: ABS tone ring.
