Overview
The Baer Brakes 53045-020 is a pair of front Claw performance rotors for the 2004–2006 Dodge Ram 1500 SRT-10, sold as a set. Each rotor is a direct replacement for the factory front rotor on the listed truck, so it is meant to take the original’s place on the same hub and bolt pattern.
The cross-drilled and slotted friction surface channels gases and dust away from the pad face during braking, which supports a steadier pedal feel and less brake fade. The zinc-plated finish gives a bright look behind open center wheels, suiting a sportier front end.
Key features
- Cross-drilled and slotted friction surface that channels gases and dust away from the pad face
- Enhanced vane structure that Baer Brakes describes as improving cooling and durability
- Mill balanced, direct replacement rotor design
- Chamfered cross-drilled holes intended to reduce stress cracking
- Zinc-plated finish for a bright appearance in open center wheels
- Directional brake surface
Choosing pads for slotted rotors
Pads and rotors work as a pair. Cross-drilled and slotted faces can bed in differently depending on the pad compound, and the pad choice affects how quickly both wear. Street driving often suits a compound with steady cold bite and low dust, while frequent towing or hard stops call for a pad rated for higher heat.
Rotor wear shows up as a pulsing pedal, vibration under braking, or grooves in the friction face that catch a fingernail. Inspect the rotors each time the pads are changed, and check the edges of the drilled holes for hairline cracks, which are a sign of heat stress.
- Bed in new pads with a series of moderate stops before normal driving
- Replace front rotors and pads as a matched set on the same axle
- Check pad thickness at every tire rotation
- Clean hub faces and mounting surfaces before fitting the rotors
- Torque lug nuts in a star pattern after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 53045-020 |
| UPC | 844165031260 |
| Axle | Front |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Slotted X drilled |
| Brake surface | Directional |
| Disc finish | Zinc plated |
| Grade | Premium |
| Outside diameter | 360 |
| Overall height | 76.7 |
| Discard thickness | 34 |
| Mounting bolt hole circle diameter | 140 |
| Stud/lug hole quantity | 5 |
| ABS tone ring included | No |
| Sold as | Set |
| Emission code | 6 |
| Country of origin | CN |
Vehicle fitment
It fits the front position of the 2004–2006 Dodge Ram 1500 (SRT-10).
It fits the front position of the 2004–2006 Dodge Ram 1500 (SRT-10) only. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Because these are direct replacement rotors, they are intended to take the place of the factory front rotors without modification. Brake pads are not part of this kit, so choose a pad set that suits a cross-drilled, slotted rotor. Support the vehicle on stands and work on one axle at a time while the rotors are off.
What’s included
The kit is a pair of direct replacement front rotors, sold as a set.
Not included: brake pads must be chosen and purchased separately to complete the front brake assembly.
