Overview
The Baer Brakes 6929336 is a right-side, 1-piece replacement brake rotor for select Baer Brake systems, measuring 11.250 inch in outside diameter. It is slotted, drilled and zinc plated, and it has a drum in the hat.
The rotor is directional and specific to one side of the vehicle, and this version is made for the right side. Its 0.720 inch nominal thickness and 3.135 overall height are the dimensions to check against the hub you are replacing. Confirm fit for your vehicle before ordering.
Key features
- Full cast, one-piece construction
- Curved vane design for cooling
- Dynamic balanced for vibration-free performance
- Drum in hat combined with the rotor surface
- Slotted, drilled and zinc-plated friction face
- Directional brake surface for the right side
- 2.782 inch register with two listed bolt circles
Drum in hat basics
A drum in the hat gives the parking brake shoes a friction surface inside the rotor. Shoes wear more slowly than pads, but they can still score the drum or lose contact over time, which reduces parking brake holding. Inspect the drum for scoring and the shoes for wear whenever the rotor is changed.
Two bolt circles mean the hub pattern must be measured rather than assumed. The register centers the rotor on the hub, so it should seat fully before the wheel is torqued. Check the drum clearance over the shoes before fitting, and recheck fasteners after the first few stops.
- Measure the drum clearance over the shoes before fitting
- Inspect parking brake shoes when the drum is replaced
- Check that the register seats fully against the hub
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929336 |
| UPC | 844165054757 |
| Outside diameter | 11.250 inch |
| Nominal thickness | 0.720 inch |
| Overall height | 3.135 |
| Stud/lug hole circle diameter | 4.50 inch and 4.75 inch |
| Stud/lug hole quantity | 5 |
| Register | 2.782 inch |
| Drum in hat | Yes |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Grade type | Performance |
| Axle | Right |
| ABS tone ring included | No |
| Emission code | 6 |
| Export description | Brake components |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is designed for select Baer Brake systems. Confirm the system and axle it matches, and compare the 5 x 4.50 and 5 x 4.75 inch bolt circles with your hub.
Confirm your vehicle’s year, model and trim before ordering. The rotor is right-side only.
Installation notes
Because this rotor has a drum in the hat, check the drum surface and hat for fit before mounting. Confirm the right-hand side, since the brake surface is directional. Set up the pads and caliper using the instructions supplied with them.
What’s included
One Baer Brakes 6929336 replacement rotor, supplied as each.
Not included: brake pads, caliper and mounting hardware.
