Overview
The Omix-ADA 16719.09 is a brake master cylinder for 1977–1978 Jeep CJ5 and CJ7 models without power brakes and with a 6 bolt caliper plate. It is a direct-fit replacement.
The 16719.09 is a direct OE replacement built to original specifications, and Omix-ADA gives it a limited five year manufacturers warranty.
Key features
- For vehicles without power brakes
- For a 6 bolt caliper plate
- Direct-fit replacement
- Limited five year manufacturers warranty
Manual brake master cylinder service
Without a booster, pedal force goes straight to the master cylinder, so the pedal feel depends heavily on the cylinder’s seals and bore condition. Check the brake pedal for a firm feel and steady height before driving. A low or sinking pedal under steady pressure usually means internal leakage or air in the system.
When fitting a replacement, confirm the pushrod sits correctly and that the reservoir cap seal is intact. Fill the reservoir with fresh brake fluid of the type the system uses, and bleed each wheel in turn, starting at the farthest one. Keep the reservoir topped up during bleeding so no air returns.
Inspect the old cylinder’s mounting studs and nuts, and replace any that are rusted or stripped. Keep the work area clean, because dirt entering the system can damage the seals of both the new cylinder and the wheel cylinders.
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 16719.09 |
| Part type | Brake master cylinder |
| Power brakes | No, for manual-brake vehicles |
| Caliper plate | 6 bolt |
| Type | Replacement |
| Fit style | Direct fit |
| Warranty | Limited five year manufacturers warranty |
Vehicle fitment
It fits the 1977–1978 Jeep CJ5 and the 1977–1978 Jeep CJ7.
Years outside 1977–1978 and other CJ models are not covered. Verify fit against your vehicle’s year, model and trim before buying.









