Overview
The Baer Brakes 6801279 is a push rod depth gauge for measuring the clearance between a brake master cylinder and the brake booster push rod. It is a hand tool for brake builders and mechanics, and it is not tied to one vehicle, so no vehicle list applies.
Getting that clearance right matters for pedal feel. Too little clearance can cause unwanted brake drag, while too much can lead to excessive pedal travel. The gauge replaces the straight edge, micrometer and calculator method, so the measurement can be taken quickly at the booster. It suits any brake builder’s or mechanic’s tool box.
Because the reading decides how far the push rod sits, it is worth repeating the measurement any time the master cylinder or booster is changed.
Key features
- Measures booster push rod to master cylinder clearance in one check
- Helps prevent unwanted brake drag caused by incorrect clearance
- Helps prevent excessive pedal travel
- Aluminum body with a steel pin and thumb screw
- Gray anodized finish
- Made in the USA
- Sold individually, one depth gauge per package
Using the reading
A push rod depth gauge sets the gap between the master cylinder piston and the booster push rod. That gap decides how far the pedal travels before the master cylinder engages and how fully the brakes release. Builders often check it after changing a master cylinder, a booster or the pedal assembly, because any of those changes can shift the position of the push rod.
Take the reading with the gauge seated squarely at the booster, and keep the pin and thumb screw clean so the measurement repeats. Write each result down before making an adjustment, so the direction and amount of change are clear after every attempt. Recheck after the first few drives, since new seals and bedding can change how the pedal feels.
- Measure with the master cylinder and booster installed as they will run
- Record each reading before and after an adjustment
- Recheck after replacing the master cylinder or booster
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6801279 |
| UPC | 844165051886 |
| Type | Push rod depth gauge |
| Body | Aluminum with steel pin and thumb screw |
| Finish | Gray anodized |
| Color | Gray |
| Quantity | 1 depth gauge, sold individually |
| Country of origin | USA |
Vehicle fitment
It is a measuring tool rather than a vehicle-specific part, so it is not tied to a particular model or year. Check the gauge against your own master cylinder and booster push rod to see whether it suits the job.
The gauge measures a clearance; it does not adjust the push rod for you.
Installation notes
Measure the clearance with the gauge at the booster, then compare the reading with the setting your brake system calls for. Brake clearance affects pedal feel and how fully the brakes release, so take a second reading after any adjustment and verify the result before driving the vehicle.
What’s included
One push rod depth gauge, sold individually.











