Overview
The Baer Brakes 2000038 is a pair of 0.5 inch thick aluminum wheel spacers for a 6×4.50 bolt pattern, which means 6 lug holes on a 4.5-inch circle. A wheel spacer mounts between the hub and the wheel to move the wheel outward. Baer lists brake clearance, a wider track and appearance as reasons to fit one.
Baer machines these spacers in-house from 6061-T6 billet aluminum and finishes them in clear anodized silver. The center bore is 3.075, the stud holes are 0.562 and the spacer outer diameter is 6.500. Vehicle fit depends on how those dimensions match your own hub and wheel.
Key features
- Machined from 6061-T6 billet aluminum
- Six lug holes with 0.562 stud holes
- 0.5 inch (.500 inch) thickness
- Clear anodized silver finish
- Sold as a pair with 2 spacers in the package
- Baer lists increased brake clearance and a wider track as benefits
- Made in the USA.
Before you buy
Wheel spacers change how the wheel sits on the hub, so the first check is whether your hub matches the bolt pattern, center bore and stud length the spacer needs. A spacer that clears the caliper on one vehicle can still rub the fender or sit off-center on another, so measure before ordering instead of relying on thickness alone.
Longer studs are often part of the job. The stud has to reach through the spacer and still leave full thread engagement in the lug nut. Many owners replace the studs at the same time, and inspecting them for thread wear and bent shafts is a sensible step before the spacer goes on.
- Check thread engagement on every stud after fitting
- Re-torque lug nuts after the first short drive
- Inspect wheel bearings if the vehicle is driven with spacers regularly
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000038 |
| UPC | 844165004752 |
| Bolt pattern | 6×4.50 (6 lug holes) |
| Thickness | 0.5 inch |
| Center bore | 3.075 |
| Stud hole diameter | 0.562 |
| Spacer outer diameter | 6.500 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Sold as | Pair |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
Match the 6×4.50 bolt pattern, the 3.075 center bore and your current stud length to your hub before choosing a size.
Confirm your vehicle’s year, model and trim before ordering. Match the 6×4.50 pattern and 3.075 center bore to your hub first.
Installation notes
Mounting hardware is not included, so you need wheel studs or lug nuts long enough to hold the wheel through the added 0.5 inch. Baer warns that most cars cannot take more than 1/4 inch (.250) of spacer on stock studs, though that is not always the case, so check thread engagement on each stud before fitting. Baer also says to use the proper length studs with wheel spacers.
A spacer that reduces stud engagement can let a wheel work loose, so confirm every fastener fully seats before you drive.
What’s included
One pair of 6061-T6 aluminum wheel spacers, 2 spacers in total.
Not included: Wheel studs, lug nuts and mounting hardware.












