Overview
The Spidertrax Offroad WHS002 wheel spacers are 1.25 inch thick aluminum spacers for a 5 on 4.5 bolt pattern, finished in anodized blue. Spidertrax describes them as a way to space front and rear axles on Jeep XJ, YJ, TJ, ZJ, KJ and KK models.
Each spacer is made of 6061T6 aluminum and double anodized in dark blue, which gives it corrosion resistance. The spacers are wheel and hub centric and made in the USA.
Key features
- 1.25 inch thickness with a 5 on 4.5 bolt pattern
- 6061T6 aluminum body
- Double anodized dark blue finish
- Wheel and hub centric design.
- Kit includes 2 spacers, 10 pre-installed wheel studs, 10 lug nuts and Loctite
- Made in the USA
Hub-centric fit and studs
Hub spacers sit between the hub and the wheel, so the wheel is pushed outward while the studs and nuts carry the same clamping load. Thickness changes the leverage on the wheel bearings and the outer axle. Anodized aluminum resists corrosion well, but the hub face still needs cleaning before each mount.
Pre-installed studs help keep the install simple, but each stud should still be checked for thread engagement through the spacer and into the nut. Loctite is included, and it is used on the threads to help keep nuts in place. Clean the threads before applying it, and follow the torque your vehicle requires.
Spacers also change tire clearance, so recheck the fenders, steering stops and brake parts after the first drive. Torque the nuts again once the spacers have settled, and inspect the studs for bending or movement. A wheel that wobbles or clicks after fitting needs immediate attention.
- Check stud thread engagement
- Clean hub face and threads
- Recheck torque after the first drive
Specifications
| Brand | Spidertrax Offroad |
|---|---|
| Part number | WHS002 |
| UPC | 8403674937 |
| Bolt pattern | 5 on 4.5 |
| Thickness | 1.25 inch |
| Material | 6061T6 aluminum |
| Finish | Anodized blue, dark blue double anodized |
| Spacers per kit | 2 |
| Wheel studs | 10 standard, pre-installed |
| Lug nuts | 10 |
| Thread locker | Loctite |
| Origin | Made in the USA |
Vehicle fitment
Spidertrax names front and rear Jeep XJ, YJ, TJ, ZJ, KJ and KK axles, but no structured fitment list is published and no model years are given. Confirm your vehicle’s year, model and trim before ordering.
Applications cover only those chassis codes. Jeep JK, JL and other models are not part of this fitment.
Installation notes
The 10 wheel studs come pre-installed and Loctite is included. Hub-mounted spacers change clearance, so recheck tire and steering clearance after fitting.
What’s included
Two wheel spacers, 10 standard wheel studs (pre-installed), 10 lug nuts and Loctite.









