Overview
The Baer Brakes 2000042 is a pair of 5-lug wheel spacers, 0.125 inch (1/8 inch) thick, built for 5 on 4.50 inch and 5 on 4.75 inch bolt patterns. A wheel spacer moves the wheel outward on the hub, which creates room for brake calipers and rotors and can widen the track. This set is made from zinc plated steel in a silver finish and is made in the USA.
The spacers improve brake clearance, widen the track and change the stance. Check the bolt pattern, hub bore and stud length against your own vehicle before fitting them.
Key features
- Zinc plated steel construction in a silver finish
- Thickness of 0.125 inch, one eighth of an inch
- Bolt patterns 5×4.50 and 5×4.75 inch for 5-lug hubs
- Center bore of 2.800 inch to clear the hub
- Stud holes of 0.531 inch for 5 lug studs
- Baer lists appearance, track width and brake clearance as the main benefits
- Supplied as a pair, made in the USA
Before you fit spacers
Spacers push the wheel farther out on the hub, so the wheel studs carry the same load over a longer lever arm. That makes stud length and thread engagement the first things to check. Count the threads on each stud and confirm the lug nut seats fully on the spacer face before driving. Studs that are too short can strip or let the wheel work loose, so measure before installation rather than after a problem appears.
Outward movement also shifts steering geometry a little and changes how the tire sits in the fender. Anyone running larger tires or a wider track should check for rubbing at full steering lock and under suspension travel. Wheel bearings see slightly different loads as well, so a bearing that already runs rough is worth inspecting before adding spacers.
- Measure stud length with the spacer installed
- Clean the hub face and spacer contact surface
- Re-torque lug nuts after the first few drives
- Inspect studs for stretching or thread damage at each tire rotation
- Check tire clearance at full steering lock
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000042 |
| UPC | 844165034162 |
| Product type | Wheel spacer, pair |
| Bolt pattern | 5×4.50 and 5×4.75 inch |
| Thickness | 0.125 inch (1/8 inch) |
| Center bore | 2.800 inch |
| Stud hole diameter | 0.531 inch |
| Lug holes | 5 |
| Spacer outside diameter | 6.000 inch |
| Material | Steel |
| Finish | Zinc plated |
| Color | Silver |
| Includes | 2 wheel spacers |
| Mounting hardware included | No |
| Origin | United States |
Vehicle fitment
It is for 5-lug hubs at 4.50 or 4.75 inch bolt circles, and it suits a vehicle only when the center bore and stud length also match. Confirm fit for your vehicle’s year, model and trim before ordering.
It does not cover 6-lug or other bolt patterns. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Wheel spacers add load to the wheel studs. At 0.125 inch this set is well under the quarter inch figure Baer gives for many cars on stock studs, but thread engagement should still be counted on each stud before fitting. Mounting hardware is not included, so plan for longer studs or lug nuts matched to the added thickness if the current hardware is too short. Re-check lug nut tightness after the first few miles of driving.
What’s included
The package contains 2 wheel spacers, supplied as a pair.
Not included: Mounting hardware such as wheel studs or lug nuts.












