Overview
The Baer Brakes 2000040 is a pair of 6-lug wheel spacers, 0.375 inch (3/8 inch) thick, for 6 on 5.50 inch bolt patterns. A wheel spacer moves the wheel outward on the hub, which opens space for brake calipers and rotors and can widen the track. This set is machined from 6061-T6 billet aluminum with a clear anodized finish and is made in the USA.
The spacers are built for better brake clearance, a wider track and a changed look. Fit depends on the 6×5.50 pattern, the 3.075 inch center bore and the stud length, so check those against your hub before fitting.
Key features
- Billet 6061-T6 aluminum construction
- Clear anodized finish over a silver color
- Thickness of 0.375 inch, the thickest of Baer’s 6-lug aluminum spacers in this group
- Bolt pattern 6×5.50 inch
- Center bore of 3.075 inch
- Lug holes of 0.562 inch for 6 studs
- Supplied as a pair, made in the USA
Choosing a spacer thickness
Spacer thickness is the first decision. A thicker spacer buys more brake caliper room and a wider stance, but it also pushes the wheel further from the hub mounting face. That shift changes the scrub radius and the way the tire loads the bearings. Before choosing a thickness, consider how much clearance the brakes actually need and whether the tire will still clear the fender at full lock.
Longer studs are usually part of the installation on a spacer this thick. Check that the new studs seat fully in the hub and that the nut contacts the spacer evenly. Some drivers inspect the wheel bearings or axle seals when a wheel moves outward, because the bearing load changes. Re-check lug nut torque after the first drives.
- Compare brake clearance needs before choosing thickness
- Confirm tire clearance at full steering lock
- Check bearing and seal condition after a larger move
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000040 |
| UPC | 844165004776 |
| Product type | Wheel spacer, pair |
| Bolt pattern | 6×5.50 inch |
| Thickness | 0.375 inch (3/8 inch) |
| Center bore | 3.075 inch |
| Stud hole diameter | 0.562 inch |
| Lug holes | 6 |
| Spacer outside diameter | 7.250 inch |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Includes | 2 wheel spacers |
| Mounting hardware included | No |
| Origin | United States |
Vehicle fitment
The set is for 6-lug hubs at a 5.50 inch bolt circle. It suits a vehicle only if the 3.075 inch center bore and stud length also match.
Before ordering, check that your year, model and trim are compatible with a six-lug 6×5.50 hub. The set does not cover 5-lug or other bolt patterns.
Installation notes
At 0.375 inch this is the thickest spacer in the group, so stud length matters most. Baer’s guidance says many cars cannot take more than a quarter inch of spacer on stock studs, so this set is generally fitted with longer studs. Mounting hardware is not included. Check thread engagement on every stud before torquing the lug nuts, and re-check tightness after the first drive.
What’s included
The package contains 2 wheel spacers, supplied as a pair.
Not included: Mounting hardware such as wheel studs or lug nuts.












