Overview
The Baer Brakes 2000039 is a pair of 6-lug wheel spacers, 0.25 inch (1/4 inch) thick, for 6 on 5.50 inch bolt patterns. A wheel spacer pushes the wheel outward on the hub, which gives brake calipers and rotors more room and can widen the track. This set is cut from 6061-T6 billet aluminum with a clear anodized finish and is made in the USA.
The spacers improve brake clearance, widen the track and change the stance. Match the 6×5.50 pattern, the 3.075 inch center bore and the stud length to your hub before fitting.
Key features
- Billet 6061-T6 aluminum construction
- Clear anodized finish in silver
- Thickness of 0.25 inch, one quarter of an inch
- Bolt pattern 6×5.50 inch
- Center bore of 3.075 inch
- Lug holes of 0.562 inch for 6 studs
- Supplied as a pair, made in the USA
Choosing aluminum spacers
Billet aluminum spacers are machined from solid stock rather than cast, and the anodized surface resists corrosion on the hub side. Aluminum responds to heat and clamp load differently than steel and can settle under the lug nuts over time, so torque deserves a check after the first drives and periodically afterward. Keep the spacer faces clean and free of road grime before installation.
When weighing aluminum against steel, consider how the vehicle will be driven. Aluminum spacers are often paired with lug studs and nuts sized to the added thickness. Avoid mixing dissimilar metals where moisture collects on the hub face, and inspect the anodized finish for chips or scratches that expose bare metal.
- Check torque after the first drives and at tire rotations
- Look for scratches or chips in the anodized finish
- Clean hub and spacer faces before mounting
- Confirm stud thread length matches the spacer thickness
- Inspect the spacer for cracks after rough off-road use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000039 |
| UPC | 844165004769 |
| Product type | Wheel spacer, pair |
| Bolt pattern | 6×5.50 inch |
| Thickness | 0.25 inch (1/4 inch) |
| Center bore | 3.075 inch |
| Stud hole diameter | 0.562 inch |
| Lug holes | 6 |
| Spacer outside diameter | 7.250 inch |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Includes | 2 wheel spacers |
| Mounting hardware included | No |
| Origin | United States |
Vehicle fitment
It is for 6-lug hubs at a 5.50 inch bolt circle, and it suits a vehicle only when the center bore and stud length also match. Confirm fit for your vehicle’s year, model and trim before ordering.
It does not cover 5-lug or other bolt patterns. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
At 0.25 inch this set is at the quarter inch thickness that many cars run on stock studs, so thread engagement must still be counted on each stud. Mounting hardware is not included, so have longer studs or matching lug nuts ready if the current ones are too short. Re-check lug nut tightness after the first few miles of driving.
What’s included
The package contains 2 wheel spacers, supplied as a pair.
Not included: Mounting hardware such as wheel studs or lug nuts.












