Overview
The Baer Brakes 2000045 is a pair of 0.375 inch (3/8 inch) thick premium aluminum wheel spacers for five-lug wheels with 5×5.0 and 5×5.50 bolt patterns. At this thickness, checking stud engagement matters more than it would for a thinner ring.
The spacers are precision machined in-house from 6061-T6 aluminum, with a flat, true face and a clear anodized silver finish. Brake clearance, a wider track and better appearance are the main reasons owners fit a spacer like this one.
Key features
- Five-lug pattern for 5×5.0 and 5×5.50 bolt holes
- 0.375 inch (3/8 inch) thickness
- Listed to improve brake caliper clearance and widen the track
- 6061-T6 billet aluminum body
- Clear anodized silver finish
- 3.075 inch center bore, 7.000 inch outside diameter and 0.625 inch lug holes
- Made in the USA.
Caliper clearance checks
Extra spacing moves the wheel outboard, which changes the gap between the tire and fender liner and the position of the caliper within the wheel. Check clearance at full lock and at full suspension compression, since a wheel that clears at rest may rub on a turn or over a rut.
Some owners pair a spacer with wider tires or a different offset wheel, and each change adds to the total shift. Keep track of the combined offset. A wheel with a loose or worn bearing will also show rubbing sooner, so inspect the bearing before adding spacing.
- Check clearance with the tire turned fully left and right
- Measure the gap between the tire and fender liner
- Recheck clearance after changing tire size
- Inspect the caliper and brake hose after the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000045 |
| UPC | 844165004806 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.375 inch |
| Bolt patterns | 5×5.0, 5×5.50 |
| Lug holes | 5 |
| Lug hole diameter | 0.625 inch |
| Center bore | 3.075 inch |
| Spacer outside diameter | 7.000 inch |
| Mounting hardware included | No |
| Sold as | Pair |
| Country of origin | US |
Vehicle fitment
This spacer is made for five-lug wheels with a 5×5.0 or 5×5.50 bolt pattern. Compare the 3.075 inch center bore and the 0.625 inch stud holes with your hub before ordering, since those dimensions decide whether the spacer seats correctly.
Confirm your vehicle’s year, model and trim before ordering. Clearance around the caliper and suspension still has to be checked separately from the bolt pattern.
Installation notes
Stud length is the main concern with a 0.375 inch spacer. In many cases stock studs cannot take more than 1/4 inch, though that is not always the case, so this thicker ring needs longer studs in many setups. Measure thread engagement before fitting.
Because a spacer changes how the lug nuts seat, retighten them after the first few drives as a safety check.
What’s included
The box holds two spacer rings, sold together as a matched pair, each 0.375 inch thick with five lug holes.
Not included: mounting hardware, and longer wheel studs if your current studs are too short for the spacer.












