Overview
The Baer Brakes 2000050 is a pair of 0.25 inch (1/4 inch) thick premium aluminum wheel spacers for five-lug wheels with 5×108 and 5×100 bolt patterns. It is aimed at owners who want more brake clearance and a wider track.
The spacers are machined from 6061-T6 billet aluminum with a clear anodized silver finish. The 2.800 inch center bore and 6.000 inch outside diameter set the footprint of the ring, and the five lug holes let factory studs pass through. The spacers are made in the USA.
Key features
- Five-lug design for 5×108 and 5×100 bolt patterns
- 0.25 inch (1/4 inch) thickness for a modest wheel offset
- 6061-T6 billet aluminum body, precision machined
- Clear anodized silver finish
- 2.800 inch center bore and 6.000 inch outside diameter
- Made in the USA.
Caliper and suspension checks
Extra spacing moves the whole wheel outboard, so the caliper, brake hose and inner fender need room to clear at full lock and full suspension compression. A matching bolt pattern alone does not settle that question. Check the caliper bracket and hose routing with the wheel off before the first drive.
Hubs with a tight center bore rely on the spacer bore to center the wheel, so a thin ring can leave the wheel sitting on the lugs alone. Keep the mating faces clean and free of paint before assembly, and inspect the spacer for scoring after each season of use.
- Clean the hub face and spacer faces before mounting
- Check brake hose length at full steering lock
- Look for rubbing on the fender liner after a short test drive
- Replace studs that show thread damage
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000050 |
| UPC | 844165004820 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 0.25 inch |
| Bolt patterns | 5×108, 5×100 |
| Lug holes | 5 |
| Lug hole diameter | 0.562 inch |
| Center bore | 2.800 inch |
| Spacer outside diameter | 6.000 inch |
| Mounting hardware included | No |
| Sold as | Pair |
| Country of origin | US |
Vehicle fitment
Choose the spacer by hub dimensions: the 5×108 and 5×100 bolt patterns, the 2.800 inch center bore and the 0.562 inch lug holes. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. A matching bolt pattern alone does not confirm that the spacer clears the caliper and suspension.
Installation notes
Stud length decides whether a 0.25 inch spacer is practical on your vehicle. In many cases stock studs cannot take more than 1/4 inch, though that is not always the case. Measure how far each nut threads onto its stud before fitting, and move to longer studs if the engagement is short.
A spacer moves the wheel outward and changes how the lug nuts seat, so check the torque after the first drive and retighten as needed.
What’s included
The package holds two spacer rings, sold as a pair, with the 0.25 inch thickness and the 5×108 and 5×100 hole pattern shown above.
Not included: mounting hardware, and longer wheel studs if your current studs are too short for the spacer.












