Overview
The Baer Brakes 2000041 is a pair of 0.5 inch (1/2 inch) thick six-lug wheel spacers for the 6×5.50 bolt pattern. Its billet 6061-T6 aluminum body and clear anodized finish are built for a wheel that sits further out, and Baer cites added brake clearance and a wider track as the main reasons to use one.
The spacer has a 3.075 inch center bore, 0.562 inch lug holes and a 7.250 inch outside diameter. At 0.5 inch thick, stud length matters more than it does on thinner spacers, and the set is sized by bolt pattern rather than by vehicle.
Key features
- Billet 6061-T6 aluminum construction
- Clear anodized finish in silver color
- Six lug holes for the 6×5.50 bolt pattern
- 3.075 inch center bore
- 0.5 inch thickness
- Sold as a pair with two spacers
- The wider stance it creates adds brake caliper clearance and a more filled-out look.
Stud length and thick spacers
A half inch of spacing changes the job more than any other factor. Each stud carries the wheel out on a longer lever, and the threads must reach far enough past the nut to hold the full load. Measure the current stud projection before ordering, and plan for longer studs or lug bolts that match the spacer’s thickness and the nut seat.
Aluminum spacers are lighter than steel, but they still need clean, flat mating surfaces. Remove any corrosion from the hub face and the spacer faces, and avoid anti-seize on the studs unless the stud maker approves it. Check the spacer body for cracks or raised edges after the first drives, and retorque the nuts on schedule.
- Measure stud projection before ordering
- Clean hub and spacer faces before fitting
- Check the spacer body for cracks periodically
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000041 |
| UPC | 844165004783 |
| Spacer type | Six-lug wheel spacer, sold as a pair |
| Bolt pattern | 6×5.50 |
| Lug holes | 6 |
| Thickness | 0.5 inch (1/2 inch) |
| Center bore | 3.075 inch |
| Lug hole diameter | 0.562 inch |
| Spacer outside diameter | 7.250 inch |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Grade type | Premium |
| Country of origin | US |
| Mounting hardware included | No |
Vehicle fitment
The set is sized by the 6×5.50 bolt pattern, the 3.075 inch center bore and the stud length rather than by vehicle. Those are the figures to check against your hub.
Fit depends on your hub’s six-lug pattern and your stud length. Verify the year, model and trim before ordering.
Installation notes
Baer warns that stock studs in many cases cannot take more than 1/4 inch (.250) of spacing. A 0.5 inch spacer goes well past that figure, so longer studs or lug bolts are needed before fitting.
Confirm every lug nut has full thread engagement on the longer studs before driving.
What’s included
Two aluminum wheel spacers, sold as one pair, at 0.5 inch thick.
Not included: Mounting hardware, including the longer wheel studs or lug bolts the thickness requires.












