Overview
The Baer Brakes 2000007 is a pair of 1.00 inch thick aluminum wheel spacers for 4-lug wheels with 4×100, 4×108 and 4×114.3 bolt patterns. A spacer of this thickness pushes the wheel outward on the hub, which increases brake clearance and widens the track. The body is 6061-T6 billet aluminum with a clear anodized silver finish, Premium grade and made in the USA.
A 1.00 inch spacer adds much more stud length than a thin spacer does. Baer’s notes say most vehicles cannot take more than 1/4 inch of spacer on stock studs, a figure this part clearly exceeds, and that this is not always the case. Plan on checking stud length and thread engagement before mounting, and confirm the 2.560 center bore matches your hub.
Key features
- Listed to increase brake clearance and widen the track
- Four-lug design for 4×100, 4×108 and 4×114.3 bolt patterns
- 0.562 lug holes with a 2.560 center bore
- 6061-T6 billet aluminum, graded Premium
- Clear anodized silver finish
- Sold as a pair; the package holds two spacers
Choosing the right setup
A 1.00 inch spacer is a large step outward for most hubs, so its effect on wheel bearings, steering components and the tire-to-fender gap is larger than with a thin spacer. Many owners pair a spacer this thick with a wheel that has enough backspacing to keep the tire clear of suspension parts, and they confirm that with a test fit before driving.
Thick spacers also change how the wheel sits under braking and cornering, so watch for vibration or wheel shake after installation. Stud and lug nut length matters more at this thickness. Use hardware with full thread engagement, and retorque after the first few hard drives.
- Check tire clearance at full steering lock
- Inspect spacer faces for corrosion each season
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000007 |
| UPC | 844165004684 |
| Sold as | Pair |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Thickness | 1.00 inch |
| Bolt pattern | 4×100, 4×108, 4×114.3 |
| Lug holes | 4 |
| Lug hole diameter | 0.562 in |
| Center bore | 2.560 in |
| Spacer outside diameter | 6.000 in |
| Grade | Premium |
| Mounting hardware included | No |
| Country of origin | US |
Vehicle fitment
The 2000007 is not tied to a make, model or year. Selection depends on the 4-lug bolt pattern, the 2.560 center bore and the stud length needed for a 1.00 inch spacer, so match those dimensions to your hub before ordering.
Five-lug and six-lug hub patterns fall outside this part’s bolt patterns. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Measure stud length with the spacer in place, because a 1.00 inch spacer needs more length than the 1/4 inch figure Baer cites.
- Mounting hardware is not included, so studs or lug nuts for the thicker spacer need to be bought separately.
What’s included
Two 1.00 inch aluminum wheel spacers, sold as a pair.
Not included: Mounting hardware.












