Overview
The Spidertrax Offroad WHS010 is a pair of 1.5-inch thick wheel spacers with a 5 on 5 bolt pattern, made from 6061T6 aluminum and finished in anodized dark blue. Spidertrax Offroad names them for the front and rear axles of the 2007-Present Jeep Wrangler JK, the 2006-Present Commander XK, the 2005-2010 Jeep Grand Cherokee WK and the 1999-2004 Grand Cherokee WJ.
Wheel spacers push the wheel outward from the hub, which is what this kit does on the axles named above. Each spacer is wheel and hub centric, and the kit comes with the studs, lug nuts and thread locker needed for a bolt-on installation.
Key features
- 5 on 5 bolt pattern with a 5 inch bolt circle
- 1.5 inch (1-1/2 inch) spacer thickness
- 6061T6 aluminum body
- Double anodized dark blue finish for added corrosion resistance
- Wheel and hub centric design
- Kit includes 2 spacers, 10 pre-installed standard wheel studs, 10 lug nuts and a package of thread locker
- The spacers are made in the USA.
Clearance and driving checks
Spacers shift the wheel outward, so the wheel, tire and suspension all move with it. Before driving, look for rubbing at full steering lock, check the fender lip and inner tire clearance on both sides, and confirm the brake lines are not pulled tight. Clearance that looks fine on a stand can change once the vehicle is loaded or the suspension cycles, so recheck after a short test drive.
Thread locker and torque matter on this type of bolt-on kit. Install the studs and lug nuts in a star pattern, torque them to the value in your service manual, and retorque after the first several miles. Inspect the studs for bending or thread damage each time the wheels come off.
- Look for rubbing at full steering lock
- Check brake lines and hoses for tension
- Retorque lug nuts after the first drive
- Inspect studs each time the wheels come off
Specifications
| Brand | Spidertrax Offroad |
|---|---|
| UPC | 1496702263 |
| Material | 6061T6 aluminum |
| Finish | Double anodized dark blue |
| Bolt pattern | 5 on 5 (5 inch bolt circle) |
| Thickness | 1.5 inch (1-1/2 inch) |
| Quantity | 2 spacers, sold as a pair |
| Centering | Wheel and hub centric |
| Made in | USA |
Vehicle fitment
It fits the front and rear axles of the 2007 to 2018 Jeep Wrangler JK, along with the 2006-Present Commander XK, 2005-2010 Jeep Grand Cherokee WK and 1999-2004 Grand Cherokee WJ axles.
Wrangler JL and Gladiator JT models fall outside this fitment, as do the 1997-2006 Wrangler TJ and 2004-2006 Wrangler LJ. Verify your year, model and trim against these axles before buying.
Installation notes
The 10 wheel studs come pre-installed in the spacers, so the job uses the included lug nuts and thread locker. Because spacers move the wheel outward, check tire and suspension clearance before driving on them.
What’s included
Two wheel spacers, 10 standard wheel studs (pre-installed), 10 lug nuts and a package of thread locker.









